Conference-Service.com stellt der Öffentlichkeit ein Kalendarium wichtiger Konferenzen, Symposien und sonstiger Tagungen im wissenschaftlich-technischen Bereich zur Verfügung.
Obwohl das Verzeichnis mit großer Sorgfalt zusammengestellt und ständig aktualisiert wird, weisen wir auf die Möglichkeit von Fehlern ausdrücklich hin. Bitte vergewissern Sie sich immer beim Veranstalter, bevor Sie über die Teilnahme oder Nichtteilnahme an einer Konferenz entscheiden.
| 3.ICCES 13 — International Conference on Computational & Experimental Engineering and Sciences |
| Termin | 24. Mai 2013 → 28. Mai 2013 | [ID=500352]  |
| Ort | Seattle, Vereinigte Staaten |
| Zusammenfassung | The main focus of ICCES is to bring out interactions between engineering, life sciences, and the physical sciences, and to promote research at their interfaces, so that the fast-paced developments in these disciplines can be quickly translated in to engines for global economic growth. ICCES conferences have attracted the attention of various national academies , national governments, and multinational corporations. |
| Webseite | http://www.icces.org |
| | |
| 4.7th Global Produced Water Management Praxis Interactive Technology Workshop |
| Termin | 27. Mai 2013 → 29. Mai 2013 | [ID=537117] |
| Ort | Abu Dhabi, Vereinigte Arabische Emirate |
| Zusammenfassung | The 7th Global Produced Water Management Interactive Technology Workshop Objective is the place for exchange, discussion and knowledge-sharing, we are going to present cases of studies performed by different experts for all oil and gas production technicians involved in onshore and off shore operations involved in or looking to be involved in the region. This Interactive Technology Workshop delivers underpinning knowledge of all aspects of produced water using a variety of rich multi-media techniques, leading discussion think thanks with industry experts and accredited masterclasses. |
| Webseite | http://www.praxis-global.com/index.aspx |
| Kontakt | Email: kristine.tuazon@praxis-global.com |
| Verwandte Fachgebiete | Petrochemie; Angewandte Chemie: Wasserkreislauf, Wasseraufbereitung |
| | |
| 5.CCTC 2013 — 3rd Climate Change Technology Conference |
| Termin | 27. Mai 2013 → 29. Mai 2013 | [ID=525723] |
| Ort | Montréal, Québec, Kanada |
| Zusammenfassung | The 3rd Climate Change Technology Conference (CCTC 2013) is a Canadian and international forum for the exchange of ideas for dealing with climate change. It is also an opportunity to keep abreast of emerging techniques and technologies for the mitigation of, and adaptation to, the impacts of climate change. The Engineering Institute of Canada (EIC) and ten of its member societies are organizing CCTC 2013, which will be held on the campus of Concordia University in Montreal. |
| Webseite | http://www.cctc2013.ca/ |
| Verwandte Fachgebiete | Meteorologie und Klimaveränderung |
| | |
| 6.CityPipe-2013 — International Trade Fair “Piping Systems for Municipal Infrastructure: Construction, Diagnostics, Repair and Operation” |
| Termin | 28. Mai 2013 → 31. Mai 2013 | [ID=506445] |
| Ort | Moskau, Russische Föderation |
| Zusammenfassung | CityPipe is the most powerful marketing tool to demonstrate all novelties in the sector of construction and operation of pipeline systems for municipal infrastructure. It attracts companies from different industry sectors of municipal utilities and its topics cover a wide range of issues related to water, gas and energy supply, water disposal, communications. |
| Themen | Pipes, valves, fittings, piping systems diagnostics, equipment & materials for pipes manufacturing, |
| Webseite | http://www.citypipe.ru |
| Kontakt | IEC "Crocus Expo"; Tel.: [+7 495 225 5986]; Email: s.malygin@sibico.com |
| | |
| 7.LiftBalkans — South-East European Exhibition on Elevators and Escalators |
| Termin | 29. Mai 2013 → 31. Mai 2013 | [ID=523186] |
| Ort | Sofia, Bulgarien |
| Zusammenfassung | The event is the only specialized show in Bulgaria devoted to elevators, escalators, components and accessories, monitoring and safety systems, etc. LiftBalkans will be held parallel to events covering close related topics: Energy Efficiency and Smart Buildings. |
| Themen | elevators, escalators, building automation systems, building technologies, buildings software, hardware, security systems, energy efficiency, ICT, smart buildings, smart homes, building automation software, South-East Europe, sustainable construction |
| Webseite | http://www.eeandres.viaexpo.com/en/liftbalkans |
| Kontakt | Maya Kristeva; Tel.: [0035932945459]; Email: office@viaexpo.com |
| | |
| 8.South-East European Exhibition on Building Automation and Management Systems |
| Termin | 29. Mai 2013 → 31. Mai 2013 | [ID=537405] |
| Ort | Sofia, Bulgarien |
| Zusammenfassung | “SMART BUILDINGS” international exhibition will be held for the first time togetherwith the 9th Congress and Exhibition. This exhibition includes Energy Efficiency and Renewable Energy namely,EE & RE for South-East Europe. |
| Webseite | http://www.aarkstore.com/ |
| Kontakt | Tel.: [+918149852585]; Email: events@aarkstore.com |
| | |
| 9.ISCE — 2013 IEEE 17th International Symposium on Consumer Electronics |
| Termin | 03. Jun 2013 → 05. Jun 2013 | [ID=519946] |
| Ort | Hsinchu City, Taiwan |
| Zusammenfassung | Papers reporting new developments in all areas related to consumer electronics are acceptable, including high speed connectors, signal integrity, and not limited to those listed below. All papers will be published in IEEE XPlore. |
| Webseite | http://isce.ieee-cesoc.org/ |
| Verwandte Fachgebiete | Elektronik |
| | |
| 10.COMS2013 — The Fourth Workshop on Computational Optimization, Modelling and Optimization |
| Termin | 05. Jun 2013 → 07. Jun 2013 | [ID=519469] |
| Ort | Barcelona, Spanien |
| Zusammenfassung | COMS2013 will focus on new algorithms and methods, new trends, and latest developments in computational optimization, modelling and simulation as well as applications in science, engineering and industry. |
| Themen | Topics include (but not limited to): · Computational optimization, engineering optimization and design · Bio-inspired computing and algorithms · Metaheuristics (ant and bee algorithms, cuckoo search, firefly algorithm, genetic algorithms, PSO, simulated annealing etc) · Simulation-driven design and optimization of computationally expensive objectives · Surrogate- and knowledge-based optimization algorithms · Scheduling and network optimization · Integrated approach to optimization and simulation · Multiobjective optimization · New optimization algorithms, modelling techniques related to optimization · Design of experiments · Application case studies in engineering and industry. |
| Webseite | http://www.iccs-meeting.org |
| Kontakt | Dr. Xin-She Yang School of Science and Technology Middlesex University Hendon Campus London NW4 4BT, UK Dr. Slawomir Koziel Engineering Optimization & Modeling Center Reykjavik University 101 Reykjavik Iceland Dr Leifur Leifsson Engineering Optimizatio; Email: yang.editor@gmail.com |
| Verwandte Fachgebiete | Simulation; Angewandte Mathematik: Numerische Analysis und Algebra |
| | |
| 11.Dimensionelle Tolerierung — Dimensionelle und Geometrische Tolerierung in der Bauteilkonstruktion |
| Termin | 06. Jun 2013 → 07. Jun 2013 | [ID=531640] |
| Ort | Berlin , Deutschland |
| Veranstalter | Haus der Technik (HdT) |
| Zusammenfassung | Das internationale Normenwesen ist derzeit im Umbruch. Die Bemaßung und Tolerierung wird neu ausgerichtet auf die Möglichkeiten des CAD und der digitalen Messtechnik. Als Ziel wird verfolgt, funktionssichere, wirtschaftliche und qualitätsfähige Prinzipien für die Erstellung von Fertigungsunterlagen zu standardisieren. Neu ist vor diesem Hintergrund die Dimensionelle Tolerierung für Größenmaße nach der ISO 14405-1 und für Nicht-Größenmaße nach der E ISO 14405-2. Diese löst die alte Plus-Minus-Tolerierung ab und ermöglicht durch eine Vielzahl neuartiger Spezifikationen eine eindeutige Bauteilbeschreibung. |
| Themen | Seminar, Weiterbildung, Maschinenbau - Forschung und Entwicklung |
| Webseite | http://www.hdt-essen.de/W-H110-06-074-3 |
| Kontakt | Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin; Tel.: 30 39493411; Email: h.cramer-jekosch@hdt-essen.de |
| Verwandte Fachgebiete | Berufliche Weiterbildung, Kurse |
| | |
| 12.MMT — Materials, Methods & Technologies 2013, 15th International Symposium |
| Termin | 10. Jun 2013 → 14. Jun 2013 | [ID=532962] |
| Ort | Sunny Beach, Burgas, Bulgarien |
| Zusammenfassung | We are pleased to invite you to take part in the 15th edition of the annual international scientific symposium Materials, Methods & Technologies which will be held on 10-14 June in Sunny Beach, Burgas, Bulgaria. The symposium is organised by Bulgarian Academy of Sciences, Union of Scientists in Bulgaria and Science & Education Foundation. |
| Themen | Materials, Methods and Tools for Innovation, Methods & Technologies |
| Webseite | http://www.sciencebg.net/en/events/symposiums/materials-methods-and-technologies/ |
| Kontakt | Ivan Genov; Email: mmt@sciencebg.net |
| | |
| 13.Improved Oil Recovery 2013 Praxis Interactive Technology Workshop 8th Global Edition |
| Termin | 17. Jun 2013 → 19. Jun 2013 | [ID=537116] |
| Ort | Istanbul, Türkei |
| Zusammenfassung | Praxis Global Research brings you the 8th Global Edition of the Improved Oil Recovery, Interactive Technology Workshop Series to discuss, explore and brainstorm on one of the most crucial issues the oil and gas industry is facing in terms of exploiting their mature fields. With the view of benefitting the operators worldwide in improving their recovery, the workshop aims at bringing together the technologies and experts working on enhancing the recovery in significant proportions. |
| Webseite | http://www.praxis-global.com/index.aspx |
| Kontakt | Email: kristine.tuazon@praxis-global.com |
| Verwandte Fachgebiete | Petrochemie |
| | |
| 14.DVM-Fortbildungseminar — Werkstoff- und Bauteilprüfung |
| Termin | 18. Jun 2013 → 19. Jun 2013 | [ID=511584] |
| Ort | Clausthall-Zellerfeld, Deutschland |
| Themen | Experimental mechanics, Fatigue, Fracture mechanics |
| Webseite | http://www.dvm-berlin.de/index.php?id=587&tx_seminars_pi1%5BshowUid%5D=57 |
| Verwandte Fachgebiete | Berufliche Weiterbildung, Kurse |
| | |
| 15.Versuchstechniken/Ingenieure — Versuchs- und Testtechniken für Ingenieure |
| Termin | 20. Jun 2013 → 21. Jun 2013 | [ID=531772] |
| Ort | München, Deutschland |
| Veranstalter | Haus der Technik (HdT) |
| Zusammenfassung | Im Seminar sollen die zielwirksamsten Methoden an realen Beispielen dargelegt werden. Ziel ist es, dass die Teilnehmer die erlernten Methoden direkt im beruflichen Alltag nutzen können. |
| Themen | Seminar, Weiterbildung, Maschinenbau - Konstruktion - Berechnung |
| Webseite | http://www.hdt-essen.de/W-H110-06-077-3 |
| Kontakt | Haus der Technik, Karl-Liebknecht-Str. 29 10178 Berlin; Tel.: 30 39493411; Email: h.cramer-jekosch@hdt-essen.de |
| Verwandte Fachgebiete | Berufliche Weiterbildung, Kurse |
| | |
| 16.Physical Separation '13 |
| Termin | 20. Jun 2013 → 21. Jun 2013 | [ID=432231] |
| Ort | Falmouth, Großbritannien |
| Zusammenfassung | Whether it be gravity concentration, classification or dewatering, the principles of separation are essentially the same and this, the 3rd Physical Separation conference, will bring together researchers and operators who have common interests in:
Gravity concentration methods - single and multi-G separators and dense medium separation
Classification techniques - hydrocyclones, air classifiers etc.
Solid-Liquid Separation - thickeners, clarifiers etc.
Papers dealing with magnetic separation, and electronic sorting, often utilised in conjunction with gravity concentration, are also welcome.
Microwave technology. There are many aspects of mineral processing where the use of microwaves has potential and papers dealing with the enhancement of physical processes by microwaves are encouraged. |
| Themen | minerals, mining, processing, extractive, metallurgy, gravity, separation, microwave, technology, engineering, |
| Webseite | http://www.min-eng.com/physicalseparation13/ |
| Kontakt | Dr Barry Wills; Email: bwills@min-eng.com |
| Verwandte Fachgebiete | Bergbau, Montanindustrie |
| | |
| 17.Assisted Circulation: 2012 Confernce |
| Termin | 22. Jun 2013 → 23. Jun 2013 | [ID=497516] |
| Ort | Lucca, Italien |
| Veranstalter | Gordon Research Conference |
| Webseite | http://www.grc.org/programs.aspx?year=2013&program=grs_assist |
| | |
| 18.IRF2013 — 4th International Conference on Integrity, Reliability & Failure |
| Termin | 23. Jun 2013 → 27. Jun 2013 | [ID=514820] |
| Ort | Funchal (Madeira), Portugal |
| Themen | Aircraft structures, Automotive structures, Biomechanics, Civil engineering, Composite materials & structures, Computational mechanics, Experimental mechanics, Fatigue, Fracture mechanics, Pressure vessels & piping, Railways, Reliability |
| Webseite | http://paginas.fe.up.pt/clme/IRF2013/index.htm |
| Verwandte Fachgebiete | Luft- und Raumfahrt; Fahrzeugbau und Eisenbahn |
| | |
| 19.2013 59th IEEE Pulp and Paper Industry Conference - PPIC |
| Termin | 23. Jun 2013 → 27. Jun 2013 | [ID=487012] |
| Ort | Charlotte, SC, Vereinigte Staaten |
| Zusammenfassung | Provide tehnical papers and presentations on relevant subjects to the pulp and paper industry that are informative and aid in the professional growth of the attendees. |
| Webseite | http://www.pulppaper.org |
| | |
| 20.REFINING TECHNOLOGIES AND STRATEGIES 2013 |
| Termin | 24. Jun 2013 → 26. Jun 2013 | [ID=537115] |
| Ort | Istanbul, Türkei |
| Webseite | http://www.praxis-global.com/index.aspx |
| Kontakt | Email: kristine.tuazon@praxis-global.com |
| Verwandte Fachgebiete | Petrochemie |
| | |
| 21.ISGMA 2013 — International Symposium on Green Manufacturing and Applications |
| Termin | 25. Jun 2013 → 29. Jun 2013 | [ID=514896] |
| Ort | Hawaii, Vereinigte Staaten |
| Themen | Composite materials & structures, Material science, Wind engineering |
| Webseite | http://www.isgma.org/ |
| | |
| 22.WCE 2013 — World Congress on Engineering 2013 |
| Termin | 03. Jul 2013 → 05. Jul 2013 | [ID=528127] |
| Ort | London, Großbritannien |
| Webseite | http://www.iaeng.org/WCE2013 |
| | |
| 23.ICSSE — 2013 IEEE International Conference on System Science and Engineering |
| Termin | 04. Jul 2013 → 06. Jul 2013 | [ID=544798] |
| Ort | Budapest, Ungarn |
| Zusammenfassung | System Science and Engineering has emerged as a research field that covers a wide spectrum of modern technology. A system can be considered as a collection of entities and their interrelationships gathered together to form a whole greater than the sum of the entities. It also involves with people, organizations, cultures, activities and interrelationships among them. |
| Webseite | http://conf.uni-obuda.hu/icsse2013/ |
| | |
| 24.ICAMAR2013 — 2013 International Conference on Applied Mechatronics and Android Robotics |
| Termin | 13. Jul 2013 → 14. Jul 2013 | [ID=542755] |
| Ort | TaIpei, China |
| Zusammenfassung | 2013 International conference on Applied Mechatronics and Android Robotics (ICAMAR 2013) is being organized and held in Taipei, Taiwan July 14-15th, 2013. The aim objective of ICAMAR2013 is to present the latest research and results of scientists (preferred students, PhD Students, and post-doc scientist) related to the topics of Android Mechatronics and Robotic Games. This conference provides opportunities for the different areas delegates to exchange new ideas and application experiences face to face, to establish business or research relations and to find global partners for future collaboration. The International Conference on Applied Mechatronics and Android Robotics (ICAMAR2013) is organized by the Taiwan Society of Android Robotics (TSOAR) and Hwa Hsia Institute of Technology. |
| Themen | T1: Manufacturing Technology and Processing T2: Mechatronics and Automation Mechatronics T3: Android Mechatronics and Robotic Applications T4: Applied Mechanics AND Other topics T5: Other topics |
| Webseite | http://www.icamar2013.org |
| Verwandte Fachgebiete | Robotik, Automatisierung & Mechatronik |
| | |
| 25.MFMS 2013 — The 4th Multi-Functional Materials and Structures |
| Termin | 14. Jul 2013 → 17. Jul 2013 | [ID=481843] |
| Ort | Bangkok, Thailand |
| Zusammenfassung | The main topics of this conference cover advanced and functional materials, composites and applications. green and bio-materials, smart and intelligent materials and structures, processing and engineering of materials, natural and synthetic fiber composites and materials for specific applications. Major topics and new trends will be introduced through keynote and invited lectures that will be given by internationally recognized experts. |
| Themen | Advanced and functional materials, composites and applications. green and bio-materials, smart and intelligent materials and structures, processing and engineering of materials, natural and synthetic fiber composites and materials for specific applications |
| Webseite | http://www.kmutt.ac.th/jif/mfms2013 |
| Kontakt | Prof. Narongrit Sombatsompop King Mongkut's University of Technology Thonburi (KMUTT) 126 Pracha-utid Road, Bangmod, Toongkru, Bangkok 10140; Tel.: [662-470 8645]; Email: mfms2013@gmail.com |
| Verwandte Fachgebiete | Chemikalien und Materialwissenschaft; Metallurgie und Werkstoffkunde |
| | |
| 26.MT-23 2013 — 23rd International Conference on Magnet Technology |
| Termin | 14. Jul 2013 → 19. Jul 2013 | [ID=543940] |
| Ort | Boston, Ma, Vereinigte Staaten |
| Themen | Magnets ; Superconducting magnets ; Conventional Magnets ; Permanent Magnets ; Magnets for Particle and Nuclear Physics Accelerator Magnets ; Detector Magnets ; High Field Mazgnets |
| Webseite | http://www.mt23.org/ |
| Verwandte Fachgebiete | Angewandte Physik: Magnetismus |
| | |
| 27.CARS&FoF 2013 — 27th International Conference on CADCAM, Robotics and Factories of the Future 2013 |
| Termin | 23. Jul 2013 → 25. Jul 2013 | [ID=525534] |
| Ort | London, Großbritannien |
| Zusammenfassung | The International Society for Productivity Enhancement (ISPE) was founded in 1984 in the USA with the goal to accelerate and augment the international exchange of ideas and scientific knowledge in the field of technological applications. The primary aim is to integrate technologies, strategies and resources to enhance productivity, competitiveness and thereby improve the quality and standard of life. ISPE has been promoting research and education by organising conferences, training workshops and seminars and various other professional activities. Among others, the primary aim of ISPE is to unite, on a common platform, policy makers researchers, people from academia, engineers and users of CAD/CAM, Robotics and Automation, and Advanced Manufacturing Technologies. Middlesex University was the host organiser for the 12th CARs&FoF in 1996. |
| Themen | Product Development and Sustainability, Modelling and Simulation, Automation, Robotics and Handling Systems, Supply Chain Management and Logistics, Advanced Quality Systems Tools and Quality Management, Advanced Manufacturing Processes, Human Aspects in Engineering Activities, Emerging Scenarios in Engineering Education and Training |
| Webseite | http://www.eis.mdx.ac.uk/carsfof2013/ |
| Verwandte Fachgebiete | Maschinenbau; Fahrzeugbau und Eisenbahn |
| | |
| 28.PICMET — 2013 Portland International Conference on Management of Engineering & Technology |
| Termin | 28. Jul 2013 → 01. Aug 2013 | [ID=545568] |
| Ort | San Jose, Kalifornien, Vereinigte Staaten |
| Zusammenfassung | PICMET's focus is on bringing together the experts on technology management to address the issues involved in managing current and emerging technologies. |
| Webseite | http://www.picmet.org |
| | |
| 29.3rd Annual Modular Construction & Prefabrication Asia 2013 |
| Termin | 31. Jul 2013 → 01. Aug 2013 | [ID=542716] |
| Ort | Singapore, Singapur |
| Zusammenfassung | The 3rd Annual Modular Construction & Prefabrication Asia 2013 conference will bring together all of the major stakeholders who are Asset Owners, Engineering Consultants, EPC Contractors and Fabrication Yards to a high-level forum centred on the current challenges faced by the modular construction of large-scale projects across multiple industries. |
| Themen | Modular Construction in asia for oil and gas projects, Modular Construction strategies in asia for oil and gas projects, Prefabrication in asia for oil and gas construction projects, Prefabrication strategies in asia for oil and gas construction projects, Fabrication techniques in asia for oil and gas construction projects, Modularisation techniques in asia for oil and gas construction projects, Optimal engineering construction asia, Project management strategies in asia for oil and gas construction, International collaboration for oil and gas construction projects, Procurement strategy in asia for oil and gas construction projectsm, Asia sourcing for oil and gas construction projects, Asia sourcing strategies for oil and gas construction projects, Risk mitigation for oil and gas construction in asia, Logistic planning for oil and gas construction in asia, Processing techniques for oil and gas construction in asia, Production automation for oil and gas construction in asia, Developing modularisation techniques, Oil and gas design and construction, Chemical processing plant construction, Biochemical processing plant construction, Sourcing benefits in Asia, Modular construction statements, Modular construction methodologies, Engineering procurement construction, Procurement policies and principles, Advancements in fabrication |
| Webseite | http://www.modularconstructionasia.com/Default.aspx?&MAC=DL |
| Kontakt | Tel.: [6567229388]; Email: enquiry@iqpc.com.sg |
| | |
| 30.PRICM — The 8th Pacific Rim International Conference on Advanced Materials and Processing |
| Termin | 04. Aug 2013 → 09. Aug 2013 | [ID=514329] |
| Ort | Waikoloa, HI, Vereinigte Staaten |
| Zusammenfassung | This triennial conference is the eighth in a series of international forums dedicated to advanced materials and processing. Hosted this year by TMS, the conference is jointly organized and sponsored by CSM, JIM, KIM, MA and TMS and rotates among these sponsoring organizations. PRICM-8 is being held at the Hilton Waikoloa Village in Waikoloa, Hawaii, which is situated in the middle of the Pacific Rim Region on the Kohala Coast on the Big Island of Hawaii. |
| Themen | materials, material processing, advanced materials |
| Webseite | http://www.tms.org/meetings/specialty/pricm8/home.aspx |
| Verwandte Fachgebiete | Metallurgie und Werkstoffkunde; Chemikalien und Materialwissenschaft |
| | |
| 31.ICED13 — The 19th International Conference on Engineering Design |
| Termin | 19. Aug 2013 → 22. Aug 2013 | [ID=514066] |
| Ort | Seoul, Republik Korea |
| Themen | design, engineering design, iced mechanical engineering, service design |
| Webseite | http://www.iced13.org |
| Kontakt | ICED13 organizing committee 1F Haeoreum Bldg., 748-5 Yeoksam-dong, Gangnam-gu, Seoul, Korea; Tel.: [+82-2-566-5920]; Email: info@iced-conference.org |
| | |
| 32.ICIDMP2013 — 2013 the 2nd International Conference on Industrial Design and Mechanics Power |
| Termin | 24. Aug 2013 → 25. Aug 2013 | [ID=550389] |
| Ort | Nanjing, China |
| Themen | T1: Industrial Design T2: Engineering and Automation T3: Mechanics AND Other topics |
| Webseite | http://www.icidmp.org |
| Kontakt | Tel.: [+86-24-83958379-801]; Email: cfp@icidmp.org |
| Verwandte Fachgebiete | Maschinenbau |
| | |
| 33.PCO2013 — Seventh Global Conference on Power Control and Optimization |
| Termin | 25. Aug 2013 → 27. Aug 2013 | [ID=532858] |
| Ort | Prag, Tschechische Republik |
| Zusammenfassung | Prospective authors from universities or other educational institutes and industry are invited to submit abstract and/or full paper by email before the deadline. All papers submitted before the deadline will be peer reviewed by independent specialists. |
| Themen | The scope of the conference is contemporary and original research and educational development in the area of mechanical, electrical, communication, sustainable energy, controllers, robotics, wireless sensors, biomedicine, computing, nano-science, management, environment, business, continuous and hybrid optimization. |
| Webseite | http://www.pcoglobal.com/Prague.htm |
| Kontakt | Professor Ivan Zelinka; Tel.: [+420 57 603 5192]; Email: ivan.zelinka@vsb.cz |
| | |
| 34.AEPSE 2013 — The 9th Asian-European International Conference on Plasma Surface Engineering |
| Termin | 25. Aug 2013 → 30. Aug 2013 | [ID=544222] |
| Ort | Jeju, Republik Korea |
| Zusammenfassung | The 9th Asian-European International Conference on Plasma Surface Engineering (AEPSE2013) will be held in August 25 (Sunday) to 30 (Friday), 2013, in Jeju, Korea which is an exotic UNESCO world heritage island in parallel with the 35th Dry Process Symposium in August 29 (Thursday) to 30 (Friday), 2013. The AEPSE2013 is organized by Asian Joint Committee for Applied Plasma Science and Engineering (AJC-APSE) in close collaboration with European Joint Committee for Plasma and Ion Surface Engineering (EJC-PISE). |
| Themen | 1. Fundamental science and technology of plasma surface engineering 1) Fundamentals for plasma and thin films 2) Plasma sources and processes 3) Functional films, coatings and surface functionalization 4) Analysis and evaluation of thin films and surface 5) Industrial technology and application 2. Workshop for Frontier plasma technology 3. Industry Exhibition and Marketing |
| Webseite | http://aepse2013.org |
| Kontakt | Tel.: [(Phone +82-2-3281-0216 | Fax +82-2-3281-0219)]; Email: aepse2013@biz-ocean.com |
| Verwandte Fachgebiete | Festkörperphysik; Plasmaphysik |
| | |
| 35.DTU Energy Conversion's 1st International PhD Summer School: Optimized Processing of Multi-material Architectures for Functional Ceramics |
| Termin | 26. Aug 2013 → 30. Aug 2013 | [ID=542642] |
| Ort | Roskilde, Dänemark |
| Zusammenfassung | Advanced ceramic materials find use in many different applications of great interest, e.g. thermal barrier coatings, piezoactuators, capacitors, solar cells, solid oxide fuel cells and electrolysis cells, membranes, and filters. Such components are typically characterized by complex composite and multilayer architectures, with tailored microstructures; their performance and durability are consequently highly reliant on the individual and cumulative interdependent processing steps. In addition, the single material performance limitations can be further pushed by the development of new innovative structures using ceramic science and engineering. Progress in ceramic forming has enabled low-cost shaping techniques such as tape casting and extrusion to be used in some of the most challenging technologies. These advances allow the design of complex components adapted to desired specific properties and applications. However, there is still only very limited insight into the processes that determine the final properties of such components. The theme will therefore focus on shaping and sintering of functionally graded multi-material architectures. Understanding the interplay between the processing parameters, densification and mechanical behavior of these complex shapes will facilitate the design of components with improved properties. |
| Themen | PhD summer school 2013, Sintering, Ceramic Processing, Modeling sintering, Advanced ceramics, Multilayer caramics |
| Webseite | http://www.phdsummerschool.dk |
| Kontakt | Nini Pryds, Department of Energy Conversion and Storage, Risø campus , Technical University of Denmark; Tel.: [+4522195752]; Email: nipr@dtu.dk |
| Verwandte Fachgebiete | Metallurgie und Werkstoffkunde |
| | |
| 36.ACE-2013 — Advances in Control Engineering |
| Termin | 05. Sep 2013 → 07. Sep 2013 | [ID=545936] |
| Ort | Istanbul, Türkei |
| Zusammenfassung | ACE-2013 is one of the area focused international conferences for presenting novel ideas and recent advances in the area of control engineering organized by scientific cooperations. ACE-2013 aims to increase the collaboration among researchers and practitioners with a common interest in improving control engineering through scientific and technological publications. ACE-2013 will take place in Istanbul-TURKEY during Sptember 5-7, 2013. The scientific cooperations society intends to accelerate the relations among researchers. |
| Webseite | http://ace-scoop.org/ |
| Verwandte Fachgebiete | Elektronik; Angewandte Mathematik: Dynamische Systeme, Regelung und Automatisierung |
| | |
| 37.Produced Water Management 2013 Praxis Interactive Technology Workshop 7th Global Edition |
| Termin | 09. Sep 2013 → 11. Sep 2013 | [ID=537070] |
| Ort | Istanbul, Türkei |
| Zusammenfassung | The 7th Global Produced Water Management Workshop hosted by Praxis Global Research looks into tackling surface and sub-surface issues resulting from Produced Water. The global event will primarily focus on tackling problems and challenges associated with Produced Water Treatment, Handling, Reinjection and Discharge. |
| Webseite | http://www.praxis-global.com/index.aspx |
| Kontakt | Email: kristine.tuazon@praxis-global.com |
| Verwandte Fachgebiete | Petrochemie; Angewandte Chemie: Wasserkreislauf, Wasseraufbereitung |
| | |
| 38.LCF7 — The Seventh International Conference on Low Cycle Fatigue |
| Termin | 09. Sep 2013 → 13. Sep 2013 | [ID=478512] |
| Ort | Aachen, Deutschland |
| Webseite | http://www.dvm-berlin.de/index.php?id=587&tx_seminars_pi1[showUid]=46 |
| Verwandte Fachgebiete | Maschinenbau |
| | |
| 39.LME — Lasers for Manufacturing Event 2013 |
| Termin | 11. Sep 2013 → 12. Sep 2013 | [ID=524591] |
| Ort | Schaumburg, IL, Vereinigte Staaten |
| Webseite | http://www.lia.org/conferences/laserevent |
| Verwandte Fachgebiete | Optik und Laser |
| | |
| 40.FC2013 — Fibre Concrete 2013 - Technology, Design, Application |
| Termin | 12. Sep 2013 → 13. Sep 2013 | [ID=542669] |
| Ort | Prag, Tschechische Republik |
| Zusammenfassung | Fibre Concrete 2013 is an international conference focused on fibre reinforced concretes traditionally held biennially. The objective of the conference is to offer a basis for the presentation and discussion of the recent knowledge in theory, design and use of fibre composites in concrete structures. The results of experimental research, new materials development, progress in analytical methods and their implementation in design will be presented. Successful applications of fibre reinforced concrete in structures and executions of fibre concrete structural elements and structures will be demonstrated. The conference aims at getting togethers specialists from different spheres – development, research, technology and implementation of concrete, designers and building industry enterprisers. |
| Themen | Fibre Reinforced Concrete, fibres, Concrete, Structures |
| Webseite | http://concrete.fsv.cvut.cz/fc2013/index.php |
| Kontakt | Tel.: [+420 224 354 365]; Email: fc2013@fsv.cvut.cz |
| Verwandte Fachgebiete | Angewandte Chemie: Bauchemie & Archäometrie |
| | |
| 41.Manufacturing CXO Summit |
| Termin | 16. Sep 2013 → 17. Sep 2013 | [ID=550327] |
| Ort | Las Vegas, Vereinigte Staaten |
| Zusammenfassung | The Manufacturing CXO Summit is the premium forum bringing elite buyers and sellers together. As an invitation-only event, taking place behind closed doors, the Summit offers solution providers and manufacturing executives an intimate environment for a focused discussion of key new drivers shaping the future of the manufacturing industry. |
| Themen | manufacturing, engineering, supply chain, procurement |
| Webseite | http://www.manufacturingcxosummit.com/el |
| Kontakt | Jennifer Keljik; Tel.: [13125403000 x6592]; Email: j.keljik@marcusevansch.com |
| | |
| 42.Slope Stability 2013 — International Symposium on Slope Stability in Open Pit Mining and Civil Engineering |
| Termin | 25. Sep 2013 → 27. Sep 2013 | [ID=499989] |
| Ort | Brisbane, Australien |
| Zusammenfassung | Slope Stability 2013 will provide a forum for open pit mining and civil engineering practitioners, consultants, researchers and suppliers worldwide to exchange views on best practice and state-of-the-art slope technologies. Best practice with respect to pit slope investigations, design, implementation and performance monitoring will be discussed during the symposium. |
| Themen | Data gathering, geotechnical models, design of slopes, in situ stress, numerical analysis, Excavation control, blast damage, Ground Support, depressurisation and stablisation of slopes, Surface water, ground water, Rockfalls, Slope performance, monitoring and risk management |
| Webseite | http://www.slopestability2013 |
| Kontakt | Josephine Ruddle; Tel.: [+61 8 6488 3300]; Email: info-acg@uwa.edu.au |
| Verwandte Fachgebiete | Bergbau, Montanindustrie |
| | |
| 43.3rd Annual Effective Plant Shutdowns & Turnarounds Forum |
| Termin | 25. Sep 2013 → 27. Sep 2013 | [ID=547386] |
| Ort | Warschau, Polen |
| Zusammenfassung | The 3rd Annual Effective Plant Shutdowns & Turnarounds Forum 2013 will once again address the key challenges of managing an effective plant shutdown or turnaround. This event presents a great networking opportunity for downstream professionals as they will meet their peers, leading industry experts and service providing companies. |
| Themen | Shutdowns, Turnarounds, Oil & Gas, |
| Webseite | http://oilgas.flemingeurope.com/effective-shutdowns-turnarounds-forum |
| Kontakt | Ada Tobias; Email: ada.tobias@flemingeurope.com |
| Verwandte Fachgebiete | Nichtnukleare Energieerzeugung |
| | |
| 44.SeDIF-Conference — International Conference on Seismic Design of Industrial Facilities |
| Termin | 26. Sep 2013 → 27. Sep 2013 | [ID=510955] |
| Ort | Aachen, Deutschland |
| Zusammenfassung | The Conference addresses the broad field of seismic plant engineering including seismic design of primary structures and non-structural components, the influence of soil-structure interaction as well as assessment and retrofitting of existing industrial facilities. |
| Themen | seismic plant engineering, seismic design of industrial facilities, seismic safety of buildings and secondary structures, soil-structure interaction, retrofitting |
| Webseite | http://www.SeDIF-Conference.de |
| Verwandte Fachgebiete | Chemische Verfahrenstechnik; Petrochemie |
| | |
| 45.ISPCE — 2013 IEEE Symposium on Product Compliance Engineering |
| Termin | 07. Okt 2013 → 09. Okt 2013 | [ID=520445] |
| Ort | Austin, TX, Vereinigte Staaten |
| Zusammenfassung | Focusing on product safety and regulatory compliance in the Consumer, IT, Medical Devices and Industrial Sectors in global markets. |
| Webseite | http://www.psessymposium.org |
| | |
| 46.SysTol — 2013 Conference on Control and Fault-Tolerant Systems |
| Termin | 09. Okt 2013 → 11. Okt 2013 | [ID=520444] |
| Ort | Nizza, Frankreich |
| Zusammenfassung | The conference will bring together academics and engineers active in the field of fault diagnosis and fault tolerant control and their implication in the Monitoring and Maintenance. |
| Webseite | http://www.systol13.org |
| | |
| 47.ASTR — 2013 Workshop on Accelerated Stress Testing & Reliability |
| Termin | 09. Okt 2013 → 11. Okt 2013 | [ID=545335] |
| Ort | San Diego, Kalifornien, Vereinigte Staaten |
| Zusammenfassung | ASTR 2013 will provide a forum to exchange knowledge and share ideas that address industry endeavors to limit field failures of products and to revisit existing qualification procedures. The focus will be on improving strategies to screen defects and weaknesses in electronic, electro-mechanical, and structural systems while reconciling high product Quality and Reliability with low product development cost and time to market. |
| Webseite | http://www.ieee-astr.org/ |
| | |
| 48.NewTech 2013 — Advanced Manufacturing Engineering and Technologies |
| Termin | 21. Okt 2013 → 23. Okt 2013 | [ID=542024] |
| Ort | Stockholm, Schweden |
| Zusammenfassung | The theme of the conference is “Advanced Manufacturing Engineering and Technologies”, and the aim of this initiative is providing a forum for researchers and practitioners working on the diverse issues of such a broad topic. In particular, authors, both from academia and industry are invited to submit papers for all aspects of theories, methodologies, applications, and case studies related to their work in this context. |
| Themen | New manufacturing technologies and advanced material processing, Machine tool and metrology, Metrology and integrity of machined surfaces, Monitoring and optimization of manufacturing processes, Functional and protective surfaces, Nanomaterials and Nanomanufacturing, Automation in production system, Progress in CAD/CAM technologies, Resource conservative manufacturing, Sustainable production systems development, Rapid prototyping and reverse engineering, Assembly and manufacturing system maintenance, Advances in modeling, analysis, and simulation of manufacturing, Business models in relation to production system, Supply chain management |
| Webseite | http://newtech2013.com/ |
| COMS-Konferenzanmeldung | https://www.conference-service.com/newtech2013kth/welcome.cgi |
| Verwandte Fachgebiete | Maschinenbau; Festkörperphysik |
| | |
| 49.GAS PROCESSING Praxis Interactive Technology Workshop 4th Global Edition |
| Termin | 21. Okt 2013 → 23. Okt 2013 | [ID=537102] |
| Ort | Istanbul, Türkei |
| Webseite | http://www.praxis-global.com/index.aspx |
| Kontakt | Email: kristine.tuazon@praxis-global.com |
| Verwandte Fachgebiete | Petrochemie |
| | |
| 50.Inalco 2013 |
| Termin | 21. Okt 2013 → 25. Okt 2013 | [ID=519000] |
| Ort | Montreal, Kanada |
| Zusammenfassung | The 12th INALCO conference will be held at the Palais des congrès de Montréal, in Montréal, Québec, Canada, during the Canadian International Aluminium Conference (CIAC), the flagship of a week-long series of international conferences and major events, all related to Aluminium. |
| Themen | Architecture, Construction, Design, Transport, and New Applications are among the topics to be considered. |
| Webseite | http://www.inalco2013.com |
| Kontakt | INALCO 2013, 1000 N. Rand Road, Suite 214, Wauconda, Illinois 60084 USA, Tel.: 847-526-2010, Fax: 847-526-3993, info@inalco2013.com |
| Verwandte Fachgebiete | Metallurgie und Werkstoffkunde |
| | |
| 51.Alu Solutions 2013 |
| Termin | 21. Okt 2013 → 25. Okt 2013 | [ID=519043] |
| Ort | Montreal, Kanada |
| Zusammenfassung | The conference will be held in conjunction with the AluSolutions 2013 exhibition and will provide a platform for aluminium industry professionals to meet in an intimate, relaxed environment and do business with decision makers involved with all aspects of the process and production of aluminium |
| Themen | The conference theme is sustainability in the aluminium industry and sessions will include: The Politics of Power, the Economics of Aluminium, Sustainability in Action, UBC Recycling around the World, the Gulf, China & Russia. South America, technology, transportation: automotive/aerospace, Corporate Social Responsibility (CSR) |
| Webseite | http://www.alusolutions.com |
| Kontakt | Matthew Moggridge, Editor, Aluminium International Today; Tel.: [+44 (0)1737 855132]; Email: matthewmoggridge@quartzltd.com |
| Verwandte Fachgebiete | Metallurgie und Werkstoffkunde |
| | |
| 52.ICEMS — 2013 International Conference on Electrical Machines and Systems |
| Termin | 26. Okt 2013 → 29. Okt 2013 | [ID=539028] |
| Ort | Busan, Republik Korea |
| Webseite | http://www.icems2013.com |
| Verwandte Fachgebiete | Elektrotechnik |
| | |
| 53.GEOMATE 2013 NAGOYA JAPAN — Geotechnique, Construction Materials and Environment |
| Termin | 13. Nov 2013 → 15. Nov 2013 | [ID=524240] |
| Ort | Nagoya, Japan |
| Zusammenfassung | The Third International Conference on Geotechnique, Construction Materials and Environment GEOMATE 2013 will be organized in Nagoya on Nov. 13-15, 2013 in conjunction with Nagoya Institute of Technology, GEOMATE International Society, Japanese Geotechnical Society, AOI-Engineering, Useful Plant Spread Society, HOJUN and Glorious International.. It aims to provide with great opportunities to share common interests on geo-engineering, construction materials, environmental issues, water resources, and earthquake and tsunami disasters. On Friday 11 March at 14:46, 2011 Japan Standard Time, the north east of Japan was severely damaged by the tragic earthquake and tsunami. The conference will be dedicated to the tragic Tohoku-Kanto earthquake and tsunami disasters. This is the 3nd event after the first and second international conferences that were successfully held in Tsu city, Mie, Japan and Kuala Lumpur, Malaysia with more than 150 participants in each event. The organizers encourage and welcome enthusiastic participation and look forward to receiving contributions with in-depth multidisciplinary technologies towards new research and developments. |
| Themen | Geotechnique, Construction Materials and Environment |
| Webseite | http://www.geomat-e.com/ |
| Kontakt | Tel.: [+81-59-231-9578]; Email: geomate@gi-j.com |
| Verwandte Fachgebiete | Geophysik und Geologie |
| | |
| 54.3rd Annual Plant Shut Down and Turnaround |
| Termin | 18. Nov 2013 → 20. Nov 2013 | [ID=547007] |
| Ort | Doha, Katar |
| Zusammenfassung | 3rd Annual Plant Shutdown & Turnaround: Improving Ground Zero Realities Through Effective Outage Management. This summit will have technical interactive workshops. Experts will gather to discuss how to de-bottleneck resource constraints in keeping with the theme ‘’Improving Ground Zero Realities Through Effective Outage Management’’. The three days of the forum will delve in-depth on the critical issues in three phases of turnaround: planning & logistics, shutdown & execution and start-up & evaluation. |
| Themen | Shutdown, turnaround, outage, plant maintenance, reliability, rotating equipment maintenance, planning for equipment, manpower & execution, scheduling, critical path, execution, restart, evaluation, contractor management |
| Webseite | http://www.fleminggulf.com/conferenceview/Plant-Shutdown-and-Turnaround-Management/229 |
| Kontakt | Tel.: [00 971 4609 1570]; Email: tanaya.priya@fleminggulf.com |
| Verwandte Fachgebiete | Maschinenbau; Elektrotechnik |
| | |
| 55.2nd International Conference on Industrial Engineering |
| Termin | 20. Nov 2013 → 22. Nov 2013 | [ID=530939] |
| Ort | Surat, Indien |
| Zusammenfassung | The international conference on Industrial Engineering (ICIE-2013) is being organized to bring researchers and experts from academia and industry on a common platform to discuss the latest technologies and managerial tools being adopted in the field of Science, Technology and Management. It will help to provide an opportunity for all branches of industries, to disseminate the information on most recent and relevant research, theories and practices in the area of Industrial Engineering. |
| Themen | Supply chain Management, Logistics, Knowledge Management, Quality Management, Production and Operation Management, Otimization |
| Webseite | http://www.icie2013.com/ |
| Kontakt | Dr. Tushar N. Desai / Dr. Ravi Kant, Organizing Secretary (ICIE 2013), Department of Mechanical Engineering, S.V. National Institute of Technology, Ichchhanath Dumas Road, Surat, Gujarat 395007; Tel.: [+91-261-2201845]; Email: ravi792002@yahoo.com |
| | |
| 56.ICIE-2013 — International Conference on Industrial Engineering |
| Termin | 20. Nov 2013 → 22. Nov 2013 | [ID=530937] |
| Ort | Surat, Indien |
| Zusammenfassung | The international conference on Industrial Engineering (ICIE-2013) is being organized to bring researchers and experts from academia and industry on a common platform to discuss the latest technologies and managerial tools being adopted in the field of Science, Technology and Management. It will help to provide an opportunity for all branches of industries, to disseminate the information on most recent and relevant research, theories and practices in the area of Industrial Engineering. |
| Themen | Logistics and Supply Chain Management , Information and Communication Technology Systems, Advanced Operations Management, Decision Analysis, Systems Modeling and Simulation Methods, Manufacturing Systems Engineering, e-manufacturing, otal Quality Management Systems, Six Sigma, Technology and Knowledge Management |
| Webseite | http://www.icie2013.com/ |
| Kontakt | Dr. Tushar N. Desai / Dr. Ravi Kant, Organizing Secretary (ICIE 2013), Department of Mechanical Engineering, S.V. National Institute of Technology, Ichchhanath Dumas Road, Surat, Gujarat 395007; Tel.: [+91-261-2201845]; Email: ravi792002@yahoo.com |
| | |
| 57.Fatigue Design 2013 |
| Termin | 27. Nov 2013 → 28. Nov 2013 | [ID=514928] |
| Ort | Senlis, Frankreich |
| Themen | Fatigue, Fracture mechanics |
| Webseite | http://www1.cetim.fr/fatiguedesign |
| | |
| 58.NUiCONE — 2013 Nirma University International Conference on Engineering |
| Termin | 28. Nov 2013 → 30. Nov 2013 | [ID=545056] |
| Ort | Ahmedabad, Indien |
| Zusammenfassung | Institute of Technology, Nirma University is organizing its flagship event 4th International conference on Engineering, NUiCONE 2013. This multidisciplinary conference aims at bringing professional Engineers, academicians and research scholars associated with different branches of Engineering Chemical, Civil, Computer Science & Engineering, Electrical, Electronics & Communication, Instrumentation & Control and Mechanical on a common platform to share new ideas, experiences, and knowledge. |
| Webseite | http://nuicone.org |
| | |
| 59.IEEM — 2013 IEEE International Conference on Industrial Engineering and Engineering Management |
| Termin | 10. Dez 2013 → 13. Dez 2013 | [ID=520511] |
| Ort | Hong Kong, China |
| Zusammenfassung | The IEEE International Conference on Industrial Engineering and Engineering Management (IEEM) aims to provide a forum to disseminate, to all branches of industries, information on the most recent and relevant research, theories and practices in IEEM and related fields. This conference has been hosted by leading universities in Asia and has grown over the years in tandem with the rising importance of industrial engineering and applications. All areas related to industrial engineering and engineering managem |
| Webseite | http://www.IEEM.org |
| | |
| 60.AEUD 2013 — International Conference on Architecture and Engineering in Urban Development |
| Termin | 20. Dez 2013 → 21. Dez 2013 | [ID=536107] |
| Ort | Colombo, Sri Lanka |
| Zusammenfassung | The aim objective of AEUD 2013 is to provide a platform for academicians, researchers, engineers, Urban development specialists and industrial professionals from all over the world to present their research results and development activities in Architecture , Civil Engineering and Urban Development. |
| Themen | Engineering, Architecture, Urban Development, Urban planning, Infrastructure, Development |
| Webseite | http://www.futureevents.org/icrd-archi |
| Kontakt | Tel.: [077799915]; Email: info@theicrd.org |
| Verwandte Fachgebiete | Ökosysteme, Umwelt und nachhaltige Entwicklung |
| | |
| 61.ESTMP — 2014 IEEE Electrical Safety, Technical and Mega Projects Workshop |
| Termin | 03. Mär 2014 → 05. Mär 2014 | [ID=487142] |
| Ort | Calgary, AB, Kanada |
| Zusammenfassung | The IEEE IAS ESTMP Workshop provides a forum for exchanging and advancing industry knowledge in the areas of electrical safety, engineering design, and system reliability as well as the implementation and execution of Mega Projects. The Workshop focus will be to share innovative concepts, successes as well as lessons learned |
| Webseite | http://ieee.org/estmp |
| Verwandte Fachgebiete | Elektrotechnik |
| | |
| 62.SS14 — SPIE Smart /NDE 2014 |
| Termin | 09. Mär 2014 → 13. Mär 2014 | [ID=550418] |
| Ort | San Diego, Vereinigte Staaten |
| Zusammenfassung | SPIE Smart Structures / NDE is a multidisciplinary conference devoted to: energy harvesting, non-destructive evaluation (NDE), damage detection, structural health monitoring (SHM), dielectric elastomers, actuators, shape memory alloys and polymers, magnetorheological fluids, electroactive polymers (EAP), bioinspired and robotic systems, and smart materials, sensors, systems, and networks. |
| Webseite | http://spie.org/smart-structures-nde.xml?WT.mc_id=RCal-SSW |
| Kontakt | Customer Service; Tel.: [+1 360 676 3290]; Email: customerservice@spie.org |
| Verwandte Fachgebiete | Nichtnukleare Energieerzeugung |
| | |
| 63.NWESS — 2014 IEEE Northwest Energy System Symposium |
| Termin | 30. Apr 2014 → 01. Mai 2014 | [ID=544715] |
| Ort | Seattle, WA, Vereinigte Staaten |
| Zusammenfassung | The intent of the Northwest Energy System Symposium is to provide a 2-day program to educate and train engineers and others about emerging technologies in Renewable Energy, Smart Grid and End-use Energy Applications. The two-day symposium focuses on a wide range of topics and provides information on how to best address some of the most pressing energy issues facing the industry. |
| Webseite | http://cialab.ee.washington.edu/nwess/ |
| Verwandte Fachgebiete | Elektrotechnik |
| | |
| 64.ISPCE — 2014 IEEE Symposium on Product Compliance Engineering |
| Termin | 12. Mai 2014 → 14. Mai 2014 | [ID=520572] |
| Ort | Santa Clara, CA, Vereinigte Staaten |
| Zusammenfassung | Focusing on product safety and regulatory compliance in the Consumer, IT, Medical Devices and Industrial Sectors in global markets. |
| Webseite | http://www.psessymposium.org |
| | |
| 65.TMCE 2014 — Tools and Methods of Competitive Engineering |
| Termin | 19. Mai 2014 → 23. Mai 2014 | [ID=540745] |
| Ort | Budapest, Ungarn |
| Zusammenfassung | The Tenth International Symposium on Tools and Methods of Competitive Engineering (TMCE 2014) will take place in Budapest, Hungary, from 19 to 23 May, 2014. This Symposium will be jointly organized by the Budapest University of Technology and Economics and the Delft University of Technology, the Netherlands. The series of the TMCE Symposia was launched in Budapest, and the next, tenth jubilee event will be held again in this beautiful city. TMCE 2014 will offer a traditionally high standard professional program, as well as several entertaining social and cultural events. The focus of the professional program will be on Sustainability and cyber-physical systems. Participants from government, academia and industry all over the world will share their experiences and exchange views, knowledge and cultural values. You are cordially invited to contribute industrial tutorials, scientific podium and forum session papers. Students are also encouraged and will be supported with special discounts on their registration fees. |
| Webseite | http://www.tmce.org |
| Kontakt | Zoltan Rusak; Email: info@tmce.org |
| | |
| 66.ACOMEN — 6th International Conference on Advanced COmputational Methods in ENgineering |
| Termin | 23. Jun 2014 → 28. Jun 2014 | [ID=536391] |
| Ort | Gent, Belgien |
| Zusammenfassung | ACOMEN 2014 is the 6th event in a successful series of interdisciplinary international conferences devoted to applied mathematics and numerical methods in computational sciences and engineering. The aim of the conference is to bring together a diverse community of mathematicians, engineers, and physicists involved in applied sciences, mathematics and developing advanced computational methods. |
| Themen | applied mathematics, numerical analysis and computational mathematics, financial mathematics, optimization and optimal control, inverse problems, computational finance, computational electromagnetism, fluid dynamics, heat transfer and porous media flow, computational chemistry, computational biology and medicine, computational geosciences, high-scale and parallel computing, software for scientific computations |
| Webseite | http://www.acomen.ugent.be/ |
| Verwandte Fachgebiete | Angewandte Mathematik (allgem.); Mathematische Physik |
| | |
| 67.RAMS — 2015 Annual Reliability and Maintainability Symposium |
| Termin | 26. Jan 2015 → 29. Jan 2015 | [ID=487289] |
| Ort | Palm Harbor, FL, Vereinigte Staaten |
| Zusammenfassung | This conf covers all facets of the assurance sciences. |
| Webseite | http://www.rams.org |
| | |
| 68.SysCon — 2015 Annual IEEE Systems Conference |
| Termin | 13. Apr 2015 → 16. Apr 2015 | [ID=520663] |
| Ort | Vancouver, BC, Kanada |
| Zusammenfassung | The theme of the IEEE International Systems Conference is Engineering of Complex Systems, to include Systems-of-systems, Systems Engineering, Systems Integration, and Systems Thinking. |
| Webseite | http://www.ieeesystemscouncil.org/ |
| | |
| 69.IRPS — 2015 IEEE International Reliability Physics Symposium |
| Termin | 19. Apr 2015 → 23. Apr 2015 | [ID=539262] |
| Ort | Monterey, Kalifornien, Vereinigte Staaten |
| Zusammenfassung | Sharing information related to cause, effects and solutions in the deign and manufacture of electronics and related components |
| Webseite | http://www.irps.org |
| | |
| 70.ISPCE — 2015 IEEE Symposium on Product Compliance Engineering |
| Termin | 11. Mai 2015 → 13. Mai 2015 | [ID=520706] |
| Ort | Chicago, Vereinigte Staaten |
| Zusammenfassung | Focusing on product safety and regulatory compliance in the Consumer, IT, Medical Devices and Industrial Sectors in global markets. |
| Webseite | http://www.psessymposium.org |
| | |
Stand vom 17. Mai 2013
