Tagungen und Workshops zum Thema Bergbau, Montanindustrie

Wählen Sie ein Land aus:
Australien (3) - Deutschland (2) - Kanada (7) - Namibia (2) - Russische Föderation (2) - Südafrika (3) - Ägypten (1)

ALLE LÄNDER

1
Metallurgical Testwork — “Metallurgical Testwork, Interpretation & Process Design” Short Course
19. Okt 2017 - 20. Okt 2017 • Vancouver, Kanada
Zusammenfassung:
The metallurgical testwork program is generally the most important critical path item for process design of a circuit and if it is not implemented in a well-structured and framed way by an experienced subject matter expert it can become the main reason of a mining project fatal flow. Not two ore bodies are the same. Although development of a suitable process flowsheet to treat an orebody appears to be a relatively straightforward, selecting the optimum process whilst maintaining the maximum recovery and revenue is a complex task. Aspects of metallurgical test program ranging from initial sample selection and ore characterisation to understand metallurgical response of an ore to complex pilot tests. It is necessary to develop metallurgical testplan that can cater for the variability in the orebody, whilst still providing optimum economics on the majority of the process plant feed.
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction 2.0 Metallurgical Testplan, Sample Selection, Assay & Mineralogy 3.0 Feasibility Study and Process Design 4.0 Comminution Testwork (Type, definition and sample requirements) 5.0 Gravity Concentration Testwork 6.0 Leaching Testwork 7.0 Flotation Testwork 8.0 Thickening and Filtration Testwork 9.0 Solvent Extraction Testwork 10.0 Magnetic Separation Testwork 11.0 Typical Base Metal and Gold Metallurgical Testwork 12.0 Typical Iron ore Testwork 13.0 Variability & Pilot Testing 14.0 Metallurgical Testwork, Scale up, Risks & Mitigations
Eintrags-ID:
885468
2
Water & Waste Water Treatment — “Water Treatment & Management in Mining and Mineral Processing” Short Course
22. Okt 2017 - 23. Okt 2017 • Toronto, Kanada
Zusammenfassung:
Water is fundamental to mining and mineral industry and widely used for processing and treatment, heating, cooling, dust suppression, etc. Managing water and effluent discharge quality throughout the mine life is key to efficient mining and has a big role in mining environmental impact and footprint.
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction / Water Management Plan 2.0 Water and Process Solution Treatment in Mining & Mineral Industry 3.0 Treatment Technologies (Precipitation, Membrane, Biological, IX, Sorbent, Electrochemical, TSS Removal and pH Adjustment) 4.0 Treatment for Reuse (Grinding, Flotation, Reagent Makeup, Heap Leach Makeup, Cyanide Recovery, Boilers & Cooling Towers) 5.0 Treatment for Discharge (Sulphate, Heavy Metals, Se, Cyanide, TSS, pH, Biotoxicity) 6.0 Water Issues for Specific Industries (& Case Studies) 7.0 Post-Closure Mine Water Treatment 8.0 Risk Assessment & Decision Making 9.0 Challenges and Future Opportunities & Trends
Eintrags-ID:
885453
3
Training — Metallurgy for the Non-Metallurgists
23. Okt 2017 - 24. Okt 2017 • Montreal, Kanada
Zusammenfassung:
Metals and alloys are used in a great variety of applications. Understanding how metals behave and how they can be obtained by processing raw materials is valuable to employees in this area. Extraction of metals applying various technologies, including physical separation, hydrometallurgy, pyrometallurgy and electrometallurgy . Metallurgy for the Non-Metallurgists Workshop is an important learning platform where a comprehensive overview of metallurgy and advances in the field are shared among the participants both formally and informally. This course provides important, practical knowledge to the non-metallurgist. The objective of the course is to provide a comprehensive overview of the subject ranging from topics relevant to conventional or modern technology.
Kontakt:
Tel.: [6138301760];     Email: Eduinsight@iaemm.com
Themen:
Metallurgy, hydrometallurgy, pyrometallurgy, electrometallurgy, mineral processing, melting, metals
Eintrags-ID:
914843
Verwandte Fachgebiete:
4
IMARC — International Mining and Resources Conference
30. Okt 2017 - 02. Nov 2017 • Melbourne, Australien
Zusammenfassung:
The 2017 event will centre on the theme of ‘Creating Value Through Collaboration’ and will cover all aspects of mining; from exploration to investment, production to optimisation through to new technology, future energy as well as the brand new one day programme on mining infrastructure from pit to port. The free exhibition will showcase over 100 of the latest innovations, technology and services for the mining industry.
Kontakt:
Tel.: [+61 3 9008 5946];     Email: info@imarcmelbourne.com
Themen:
mining, investment, renewable energy, cleantech, mining equipment, mining technology, mining investment, mining infrastructure
Eintrags-ID:
910824
5
Flotation '17
13. Nov 2017 - 16. Nov 2017 • Kapstadt, Südafrika
Zusammenfassung:
Flotation '17 features 2 discrete symposia: November 13-14: Flotation Fundamentals: Physics and Chemistry and November 15-16: Flotation Applications and Plant Practice.
Kontakt:
Dr Barry Wills;     Email: bwills@min-eng.com
Themen:
minerals, processing, extractive, metallurgy, mining, engineering, froth flotation, reagents
Eintrags-ID:
786838
6
FBB 4.0 — Forum Bergbau 4.0 - Smart Mining Conference
14. Nov 2017 - 15. Nov 2017 • Aachen, Deutschland
Zusammenfassung:
Nach der erfolgreichen Premiere 2015 mit über 120 Teilnehmern aus dem Rohstoffsektor, wird das 2. Forum Bergbau 4.0 am 14./15. November 2017 im Aachener Tivoli stattfinden. Industrie 4.0 – unter diesem Stichwort entwickelt die Bundesregierung in Zusammenarbeit mit Forschungsinstituten, Gewerkschaften und Wirtschaftsverbänden eine neue Hightech-Strategie, die industrielle Produktionsprozesse mit modernster Informations- und Kommunikationstechnik verknüpft. Das Forum Bergbau 4.0 vermittelt und diskutiert in diesem Zusammenhang strategische Fragestellungen, Umsetzungsmöglichkeiten sowie Chancen und Risiken für den Rohstoffsektor.
Themen:
FBB 4.0, Smart Mining, Industrie 4.0, Bergbau 4.0
Eintrags-ID:
932889
7
Gold Processing — “Gold Ore Processing” Short Course
16. Nov 2017 - 17. Nov 2017 • Toronto, Kanada
Zusammenfassung:
Gold is among the first metals used by man because it naturally occurs in its native state. Over the years different process flowsheets have been developed with the purpose of optimising gold extraction from a particular feed material using the most appropriate technology. Due to numerous factors ranging from technical e.g. geological, mineralogical, metallurgical and economical to non-technical such as geographical, environmental and political, diverse industrial flowsheet for gold production have been developed in different part of the world.
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction 2.0 Market & Economy 3.0 Mineralogy 4.0 Mineral Processing 5.0 Gravity Gold Recovery 6.0 Intensive Leaching 7.0 Cyanidation 8.0 Heap & Vat Leaching 9.0 Adsorption (CIL/CIP) 10.0 Refractory Ore Treatment 11.0 Gold Recovery – Precipitation, Stripping, Electrowinning 12.0 Other Treatment Methods 13.0 Metallurgical Testplans and Interpretation 14.0 Cyanide Management, Destruction and Effluent Treatment 15.0 Process Design and Flowsheets 16.0 Recent Advances
Eintrags-ID:
885488
8
Uranium Processing — “Uranium Ore Processing” Short Course
20. Nov 2017 - 21. Nov 2017 • Toronto, Kanada
Zusammenfassung:
Uranium is known to occur in over 200 different minerals but most of these do not occur in deposits of sufficient grade to warrant economic extraction. Uranium ore can be extracted by open pit, underground or in-situ mining methods. Uranium mill process flowsheets and unit operations for yellow cake production vary based on chemical and mineralogical characteristics of the ore to be processed. Ore characteristics are a particularly important component of the understanding the process development. Numerous other factors such as geology, radiation safety, economics, geography, environment, and regulations can change the uranium ore processing technology selection criteria.
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction 2.0 Uranium Market and Trend 3.0 Mineralogy 4.0 Processing Characteristics of Uranium Ores 5.0 Beneficiation & Upgrading (Radiometric Ore Sorting, etc.) 6.0 Comminution (Crushing & Grinding) 7.0 Pre-treatment (Gravity Concentration & Flotation) 8.0 Uranium Leaching 9.0 Thickening, Filtration and Clarification (S/L Separation) 10.0 Solvent Extraction & Ion Exchange 11.0 Precipitation & Drying 12.0 Tailings Handling 13.0 Effluent Handling 14.0 Metallurgical Testwork 15.0 Flowsheet Development & Process Design 16.0 Radiation Safety 17.0 Economics 18.0 Recent Advances & Trends
Eintrags-ID:
885458
9
Mineral Processing — “Mineral Processing for non-mineral Processors” Short Course
08. Dez 2017 • Toronto, Kanada
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction & Definitions 2.0 Crushing 3.0 Grinding 4.0 Screening and Classification 5.0 Gravity Concentration (& Dense Media Separation) 6.0 Flotation 7.0 Ore Sorting, Electrostatic and Magnetic Separation 8.0 Leaching 9.0 Solvent Extraction and Electrowinning 10.0 Filtering & Dewatering 11.0 Thickening 12.0 Tailings Disposal and Management 13.0 Recent Trends and Advances
Eintrags-ID:
885440
10
Mineral Processing — “Mineral Processing for non-mineral Processors” Short Course
11. Dez 2017 • Vancouver, Kanada
Kontakt:
Tel.: [6047827501];     Email: info@oreventure.com
Themen:
1.0 Introduction & Definitions 2.0 Crushing 3.0 Grinding 4.0 Screening and Classification 5.0 Gravity Concentration (& Dense Media Separation) 6.0 Flotation 7.0 Ore Sorting, Electrostatic and Magnetic Separation 8.0 Leaching 9.0 Solvent Extraction and Electrowinning 10.0 Filtering & Dewatering 11.0 Thickening 12.0 Tailings Disposal and Management 13.0 Recent Trends and Advances
Eintrags-ID:
885529
11
AEIC — Al Azhar’s 14th International Conference on: Engineering, Architechture and Technology
14. Dez 2017 - 16. Dez 2017 • Kairo, Ägypten
Zusammenfassung:
This Conference will discuss Engineering Science is one of the disciplines and careers in the community that specializes in studying various branches, such as; arts, sciences, physics, mathematics, computer and further engineering branches. Engineering Science integrates all the previously mentioned branches together in creative ways to develop new technological solutions of engineering analysis for testing, production, maintenance and construction.
Kontakt:
Ahmed Eid;     Tel.: [201027233310];     Email: aeic@ierek.com
Themen:
Concrete and construction technology, Computer architecture, Mineral processing.
Eintrags-ID:
882837
12
Conference “Geodesy, Mine Survey and Aerial Topography
05. Feb 2018 - 16. Feb 2018 • Moskau, Russische Föderation
Zusammenfassung:
The Conference “Geodesy, Mine Survey and Aerial Photography. At the turn of the centuries” is becoming a key platform for interaction of digital geoinformation technology specialists. The organizing committee is preparing this conference in cooperation with all participants, so, each of you is not only a participant but also a co-organizer. The result of the conference depends on all us. And the organizers will make their best efforts to provide all participants with the opportunity to speak, share experience, and express their opinion.
Eintrags-ID:
951547
13
Comminution '18
16. Apr 2018 - 19. Apr 2018 • Kapstadt, Südafrika
Zusammenfassung:
MEI's Comminution conferences are established as the main events for profiling cutting edge research and innovation in all aspects of crushing, grinding and ultrafine grinding in the minerals industry. We strongly encourage a good balance between industrially based and academic research papers showing the benefits of basing practical application on scientific rigour, such as the industrial validation of models and control techniques.
Kontakt:
Dr Barry Wills;     Tel.: [+44 7768234121];     Email: bwills@min-eng.com
Themen:
mining, minerals, comminution, crushing, grinding,
Eintrags-ID:
810748
14
ALTA 2018 Nickel-Cobalt-Copper, Uranium-REE & Gold-PM Conference & Exhibition
19. Mai 2018 - 26. Mai 2018 • Perth, Australien
Zusammenfassung:
ALTA 2018, organised by ALTA Metallurgical Services, will be the 23rd year of one of the world’s premier annual metallurgical events. The conference is an annual gathering of the global Nickel, Cobalt, Copper, Uranium-REE and Gold-PM industries and features highly focused programs, topical forums and presentations by key international speakers. Held over eight days at Pan Pacific Perth, it comprises three technical conferences, three short courses, networking functions and an international trade exhibition.
Kontakt:
Allison Taylor;     Tel.: [+61411692442];     Email: allisontaylor@altamet.com.au
Themen:
plant operations developments, process technology, new projects, testwork and scale-up, process modelling and control systems, application of mineralogy and geometallurgy, R & D, equipment, reagents, materials, tailings disposal, environmental alleviation
Eintrags-ID:
834032
15
AIMS 2018 — First International Conference – Mines of the Future
23. Mai 2018 - 24. Mai 2018 • Aachen, Deutschland
Zusammenfassung:
The Institute of Mineral Resources Engineering (MRE/RWTH Aachen University) as organizer of the Conference looks back at a long tradition in mining education and mineral resources research in Aachen. For the last 20 years, the Institute has been organizing the Aachen International Mining Symposia by selecting particular topics covering aspects of the production of mineral raw materials. With always more than 200 participants from all over the world, we established one of the major mining Conferences in Europe. The Conference language is English, meeting our international expectations and scope. Scientific lectures, exhibitions by industry, and networking events give multiple opportunities for a professional exchange in science, industry, politics and society within the mining community.
Kontakt:
Iris Schümmer;     Tel.: [00492418095673];     Email: schuemmer@mre.rwth-aachen.de
Themen:
Technological advances and innovation, Best practices and benchmarking, Responsible and sustainable mining
Eintrags-ID:
936650
16
Biohydrometallurgy '18
11. Jun 2018 - 13. Jun 2018 • Windhoek, Namibia
Zusammenfassung:
This, the 9th International Symposium on Biohydrometallurgy (Biohydromet '18), is organised by MEI with Prof Sue Harrison, Dr Patrick d'Hugues and Dr Chris Bryan. Biohydromet '18 will focus on the latest developments in the field of biohydrometallurgy: the development, optimisation and application of integrated biomining process operations for mineral ores, including low grade and complex ores; the microbiology of biomining and the application of biohydrometallurgy to novel resources (such as mine and electronic wastes) and the (bio)remediation of mining-impacted environments.
Kontakt:
Dr Barry Wills;     Email: bwills@min-eng.com
Themen:
minerals, processing, mining, hydrometallurgy, biohydrometallurgy, extractive, metallurgy, biomining, bioleaching, bioremediation, microbiology, biooxidation
Eintrags-ID:
854873
Verwandte Fachgebiete:
17
Sustainable Minerals '18
14. Jun 2018 - 15. Jun 2018 • Windhoek, Namibia
Zusammenfassung:
This, the 5th International Symposium on Sustainable Minerals '18, is organised by MEI in consultation with Prof Markus Reuter. The rapid growth of the world economy is straining the sustainable use of the Earth’s natural resources due to modern society’s extensive use of metals, materials and products. An astute and conscious application and use of metals, materials and products supported by the reuse and recycling of these materials and end-of-life products is imperative to the preservation of the Earth’s resources. The realisation of the ambitions of sustainable use of metals, materials and resources demands that the different disciplines of the material and consumer product system are connected and harmonised. This conference will discuss all aspects of material and metal usage.
Kontakt:
Dr Barry Wills;     Email: bwills@min-eng.com
Themen:
mining, minerals, processing, extractive, metallurgy, sustainability, metals, materials, recycling,
Eintrags-ID:
854861
18
NFMSib — X International Congress&Exhibition "Non-ferrous metals and minerals"
10. Sep 2018 - 14. Sep 2018 • Krasnoyarsk, Russische Föderation
Zusammenfassung:
Krasnoyarsk Territory is one of the senior and major metallurgical regions of Siberia. Krasnoyarsk Territory is in the forefront of resources and minerals mining in the world, especially in such metals as copper, nickel, cobalt, aluminum, gold and platinum. Major projects on development resource base and deep minerals recycling are implemented in Krasnoyarsk region.
Kontakt:
Marina;     Tel.: [8 391 269 56 47];     Email: nfmsib@nfmsib.ru
Themen:
aluminium, workshop, metallurgical exhibition, non-ferrous metals metallurgy
Eintrags-ID:
958920
Verwandte Fachgebiete:
19
11th ICARD | IMWA 2018 Annual Conference
10. Sep 2018 - 14. Sep 2018 • Gauteng, Südafrika
Zusammenfassung:
South Africa belongs to the world’s main mining countries. A large variety of commodities are mined, and the South African mining experience therefore, practically offers something for everyone in the global mining community. Hosting the 11th ICARD in South Africa supports the INAP Global Alliance Partners vision to have true global representation and involvement.
Kontakt:
Prof C Wolkersdorfer;     Tel.: [+27 12 3826315];     Email: Christian@wolkersdorfer.info
Eintrags-ID:
879154
20
ALTA 2019 Nickel-Cobalt-Copper, Uranium-REE-Li & Gold-PM Conference & Exhibition
18. Mai 2019 - 25. Mai 2019 • Perth, Australien
Zusammenfassung:
ALTA 2019, organised by ALTA Metallurgical Services, will be the 24th year of one of the world’s premier annual metallurgical events. This annual event is a gathering of the global Nickel, Cobalt, Copper, Uranium-REE-Li and Gold-PM industries and features highly focused programs, topical forums and presentations by key international speakers. Held over eight days at Pan Pacific Perth, it comprises three technical conferences, three short courses, networking functions and an international trade exhibition.
Kontakt:
Allison Taylor;     Tel.: [+61411692442];     Email: allisontaylor@altamet.com.au
Themen:
nickel, cobalt, copper, uranium, lithium, rare earths, gold, precious metals, plant operations developments, process technology, new projects, testwork and scale-up, process modelling and control systems, application of mineralogy and geometallurgy, R & D, equipment, reagents, materials, tailings disposal, environmental alleviation
Eintrags-ID:
918750


Conference-Service.com stellt der Öffentlichkeit ein Kalendarium wichtiger Konferenzen, Symposien und sonstiger Tagungen im wissenschaftlich-technischen Bereich zur Verfügung. Obwohl das Verzeichnis mit großer Sorgfalt zusammengestellt und ständig aktualisiert wird, weisen wir auf die Möglichkeit von Fehlern ausdrücklich hin. Bitte vergewissern Sie sich immer beim Veranstalter, bevor Sie über die Teilnahme oder Nichtteilnahme an einer Konferenz entscheiden.

Organisatoren können kostenlos ihre Konferenzankündigungen veröffentlichen.

Stand vom 18. Oktober 2017