Conférences - Métallurgie et science des matériaux

Sélecionner un pays
TOUS LES PAYS (63)
1
Intermold 2020
15 jul 2020 - 18 jul 2020 • Nagoya, Japon
Identifiant de l'évènement:
1275795
Sujets apparentés:
2
ICSSMT 2020 — International Conference on Smart Sustainable Materials and Technologies
12 aou 2020 - 13 aou 2020 • Madurai, Inde
Organisateur:
Vaigai College of Engineering
Résumé:
ICSSMT 2020 is an interdisciplinary international conference on smart sustainable materials and technologies which is focused on the research works that emphasizes latest technological innovations. It showcases various material science disciplines to develop innovative approaches with a breakthrough performance in enhancing the sustainability of various advanced materials. The international conference on smart sustainable materials and technologies organized on 12-13 August, 2020 at Vaigai College of Engineering [VEC], Madurai, Tamil Nadu, India provides a platform for engineers, technical experts and scientists to share, exchange and contribute their innovative works and combine various sustainable technologies to develop a smart next-generation materials into existence. The main focus of this conference is to open up a new paradigm to deliberate an eco-friendly and sustainable design, optimal resource utilization and sustainable materials with low environmental impact.
Contact:
Tél.: [9597324073];     Email.: icssmt.conf@gmail.com
Sujets:
Track – 1 Ceramic and composite materials Green nano materials Environmental chemistry and pollution control Simulation, modeling and control of smart materials Smart bio-materials Dynamic behaviour of materials Advanced materials for smart batteries Polymer-based smart materials Phase-change and high temperature materials Advanced materials for a smart automotive and energy applications Advanced device materials Track -2 Eco-friendly and sustainable materials Nano materials for sustainability Nano particles and nano electronics Smart materials for sewage treatment Advanced materials in waste and pollution management Renewable energy materials Smart biological materials in clinical design Bio-inspired and biomimetic smart materials Solar cell materials for smart energy harvesting Behavioural properties and material characterization Track -3 Smart materials to assist human process Advanced materials for drug-delivery process Structural monitoring technologies Smart materials in pharmaceutical applications Smart materials to maintain ecological sustainability Smart materials in aerospace applications Application of smart materials in manufacturing industries Smart photonic materials and devices Smart material fabrication and its uses Novel applications of sustainable materials
Identifiant de l'évènement:
1345486
Sujets apparentés:
3
Electroceramics XVII — 17th Electroceramics Conference
24 aou 2020 - 27 aou 2020 • Darmstadt, Allemagne
Résumé:
The 17th Electroceramics Conference will be held from 24 to 27 August 2020 at TU Darmstadt, Germany. A Summer School will also be organised on 21st and 22nd August in Darmstadt.
Identifiant de l'évènement:
1217438
4
EAMC20 — European Advanced Materials Congress
26 aou 2020 - 28 aou 2020 • Stockholm, Suède
Organisateur:
International Association of Advanced Materials (IAAM)
Résumé:
The European Advanced Materials Congress (EAMC 2020) is dedicated to provide an opportunity to promote intensive discussions among participants to widen the knowledge of Advanced Materials research. The 35th Assembly of AMC will offer coordination of following contemporary research fields to pave the way for multi-inter-trans-disciplinary translational research and innovations for the market.
Contact:
Email.: contact@iaamonline.org
Sujets:
Nano materials & Nanotechnology, Biomaterials & Biodevices, Electronic, Magnetic & Optical Materials 4. Structural & Engineering Materials 5. Thin Films, Materials Surface & Interfaces 6. Computational Materials & Modelling 7. Functional Materials 8. Energy Materials 9. Polymer Science and Technology 10. Composite & Ceramic Materials 11. Environmental & Green Materials 12. Sustainable Construction and Building Materials 13. Organic and Composite Thermoelectric Materials 14. Nanomaterials and Nano Fibers 15. Lighting Materials Research and Technology 16. Graphene Innovations and Technology 17. Meta materials 18. Nuclear Energy, Minings & Engineering Materials 19. Electronic materials
Identifiant de l'évènement:
1281994
5
XII International Congress & Exhibition “Non-Ferrous Metals and Minerals-2020”
07 sep 2020 - 11 sep 2020 • Krasnoyarsk, Russie
Organisateur:
RUSAL, Siberian Federal University, Federal Research Center «Krasnoyarsk Science Center» SB RAS, Light Metals Ltd.
Résumé:
Congress includes the following Conferences: “Aluminium of Siberia”, “Gold of Siberia”, “Metallurgy of Non-Ferrous, Rare and Precious Metals”.
Contact:
Organizing Committee;     Tél.: [+7 391 269 56 47];     Email.: nfmsib@nfmsib.ru
Sujets:
Aluminium, mining, non-ferrous metals metallurgy
Identifiant de l'évènement:
1316828
Sujets apparentés:
6
ECSCRM 2020 — 13th European Conference on Silicon Carbide and Related Materials
13 sep 2020 - 17 sep 2020 • Tours , France
7
Corrosion Technology Week 2020
13 sep 2020 - 17 sep 2020 • Houston, TX, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128272
8
International Conference on Fatigue Damage of Structural Materials XIII
13 sep 2020 - 18 sep 2020 • Cape Cod, MA, États-Unis
Organisateur:
Elsevier
Résumé:
The thirteenth biennial International Conference on Fatigue Damage of Structural Materials will be held in scenic Cape Cod at the DoubleTree by Hilton Hotel, Hyannis, USA from 13-18 September 2020. This prestigious and long running conference will bring together delegates from around the world to discuss how to characterize, predict, and analyze the fatigue damage of structural materials. The conference will maintain its unique and traditional format of single-session 30 min oral presentations that facilitates sufficient time for a thorough technical presentation, follow-up discussions, and collegial debate of the cutting-edge issues in the field of fatigue. The entire conference program is deliberately scheduled with equal significance to our poster sessions, themed in relation to the oral presentations, and assessed for awards via a peer review process. Furthermore, all delegates are strongly encouraged to submit a paper to be published in a conference specific Special Issue of International Journal of Fatigue. We welcome our colleagues to join us once again in the charming and historic city of Hyannis, MA on Cape Cod; our returning delegates will be delighted to find that we are returning to the more modern and updated conference venue used in 2018. We are excited to invite members of the domestic and international fatigue community to join us (again or for the first time) as we continue to advance the knowledge and understanding of the mechanics, materials, environmental, and computational aspects of fatigue damage in structural materials.
Sujets:
Environmental Cracking, High Temperature Fatigue Behaviour, Advanced Crack Characterization Techniques, Atomistic-to-Microstructure Scale Computational Modeling, Microstructural Origins of Crack Formation and Propagation, Fatigue of Additively Manufactured Materials, Loading Protocol Effects (e.g. multi-axial, variable amplitude, thermo-mechanical, contact fatigue), Effects of Materials Modification (e.g. welds, shot peening), Next Generation Crack Tip Mechanics, Data Science Based Approaches
Identifiant de l'évènement:
1282626
Sujets apparentés:
9
Metallographie-Tagung 2020
16 sep 2020 - 18 sep 2020 • Saarbrücken, Allemagne
Organisateur:
DGM e. V. c/o Inventum GmbH
Résumé:
Die 54. Metallographie-Tagung wird im Jahre 2020 in Saarbrücken stattfinden. Die Themen werden neben den traditionellen Schwerpunkten der Präparation und mikroskopischen Gefügeabbildung, der Gefügeanalyse sowie der metallographischen Schadensanalyse vor allem in zwei zukunftsträchtigen Bereichen liegen, für die der Saarbrücker Campus mit seinen Experten und seiner technischen Ausstattung wie kein zweiter in Deutschland steht. Das ist einerseits die Weiterentwicklung und Anwendung aller Tomographieverfahren von der Mikro- über die Nano- bis zur atomaren Skala und andererseits die Anwendung modernster Informatikkompetenz auf die drängende systematische und effiziente Digitalisierung.
Contact:
DGM e. V. c/o Inventum GmbH;     Tél.: [+49 (69) 75306 741];     Email.: metallographie@dgm.de
Sujets:
Präparationstechnik, mikroskopisch, Charakterisierung, Materialographie, Materialklassen, Qualitativ, quantitativ, Gefügeanalyse, Korrelation, Materialeigenschaften, Tomographie, 3D, digital, Bildverarbeitung, Analytik, Gefüge, Untersuchungen, Bewertung, Schadensfälle, Metallographie, Metallografie, Materialentwicklung, Prozessentwicklung, Struktur, Funktion, Werkstoffe, Digitalisierung, Präparation, Schadensanalyse, Zukunft, Tomographie, Mikro, Nano, atomar, Informatik, Materialwissenschaft, DGM, Metalle, Stahl, Eisen, Keramik, Aluminium
Identifiant de l'évènement:
1286603
10
Symposium Strangpressen — Symposium „Strangpressen – Innovative Anwendungen und zukünftige Märkte“
17 sep 2020 - 18 sep 2020 • Neu-Ulm, Allemagne
Résumé:
Am 17. und 18. September 2020 findet das von der DGM e.V. und dem Fachausschuss „Strangpressen“ organisierte Symposium „Strangpressen – Innovative Anwendungen und zukünftige Märkte“ in Neu-Ulm im Edwin-Scharff-Haus statt. Mit dem Symposium wird interessierten Fachbesuchern die Möglichkeit gegeben, aktuelle Verfahrensentwicklungen und zukünftige Perspektiven der Herstellung und Verwendung von Leicht- und Schwermetallhalbzeugen im Kontext von Digitalisierung und globalen Märkten kennenzulernen und sich mit führenden Fachleuten auszutauschen.
Contact:
Tél.: [+49 (69) 75306 741];     Email.: strangpressen@dgm.de
Sujets:
Werkstoffwissenschafen, Strangpressen, Verfahrensentwicklung, Schwermetallhalbzeug, Leichtmetallhalbzeug, Prozesssteuerung, Werkzeugbau, Profildesign, Halbzeug, Aluminiumhalbzeug, Kupferhalbzeug, Anlagentechnik, Verfahren
Identifiant de l'évènement:
1268655
Sujets apparentés:
11
36AMC2020 — 36th Assembly of Advanced Materials Congress 2020
21 sep 2020 - 25 sep 2020 • Genoa, Italie
Organisateur:
International Association of Advanced Materials (IAAM)
Résumé:
36th assembly of Advanced Materials Congress 2020, which will be held at Genoa, Italy from 21- 25 September 2020 provides an international platform for academia and industries to discuss the recent trends in the field of advanced materials science, engineering and technology. Since 2011, International Association of Advanced Materials, IAAM has successfully organized this flagship assemblies in Europe, Asia, America, Australia. 36th AMC 2020 is dedicated to provide an opportunity to promote intensive discussions among participants to widen the knowledge of Advanced Materials research. The 36th Assembly of Advanced Materials Congress will offer the coordination of following contemporary research fields to pave the way for multi-inter-trans-disciplinary translational research and innovations for the market.
Contact:
Email.: contact@iaamonline.org
Sujets:
Advanced Materials, Sensors and Actuators, Catalysis Science, Engineering and Technology, Energy Storage Technologies, Metallic Alloys and Composites, High Entropy Alloy in Defence System
Identifiant de l'évènement:
1338678
12
EuroPM 2020
04 oct 2020 - 07 oct 2020 • Lisbonne, Portugal
Organisateur:
European Powder Metallurgy Association
Résumé:
Euro PM2020 is set to feature a world class technical programme alongside the Euro PM2020 exhibition, held Monday to Wednesday, representing the entire PM supply chain and all PM related industrial sectors, companies from raw material suppliers, furnace equipment manufacturers and tooling producers.
Identifiant de l'évènement:
1349791
13
MS&T20 — 2020 Materials Science and Technology Conference
04 oct 2020 - 08 oct 2020 • Pittsburgh, États-Unis
Résumé:
Now in its 16th year, Materials Science and Technology Conference hosts over 3,200 attendees, more than 2,000 presentations, a robust plenary speaker lineup, society based special events, and a collaboration among five leading materials science societies. If you work in any facet of materials science, this is the conference for you.
Identifiant de l'évènement:
1241033
14
ICMSS 2020 — 3rd Scopus-Indexed AIP International Conference on Material Science, Smart Structures and Applications [ICMSS 2020]
15 oct 2020 - 16 oct 2020 • Erode, Inde
Organisateur:
Prof. E. Baraneetharan Associate Professor & Head, Dept. of EEE, Surya Engineering College. Erode, India.
Résumé:
Material sciences and smart structures have been developed based on the properties and it will respond based on the different surrounding environments. It involves different environmental conditions such as temperature, light and pressure. Hence, smart structures and material sciences work in a smart way to adopt the properties like mechanical, optical, electromagnetic and thermal properties. By using these properties can predict and control the environment in an effective manner. These material properties will adapt to the surrounding different environmental conditions as well as it helps to save the human beings using this structural health monitoring for civilian applications, self-defense for military applications, self-repair for mechanical applications, reduce wastes in space and nuclear industries and also helps in medicine and engineering applications. Due to the higher demand for material science gives the hope to achieve the greatest hope in material sciences, smart structure and its applications in future. So this conference is about bringing out the new smart and innovative ideas from the people belonging to the material sciences and smart structure applications from all over the world for the bright and ingenious future.
Contact:
CONFERENCE CHAIR;     Tél.: [9500406834];     Email.: icmss.contact@gmail.com
Identifiant de l'évènement:
1354928
15
NuMat 2020 — The Nuclear Materials Conference
26 oct 2020 - 30 oct 2020 • Gand, Belgique
Résumé:
Following on from NuMat 2018 in Seattle USA, where over 500 delegates presented their work, NuMat 2020 will focus on broad topics of interest to the nuclear materials community. There will be six plenary speakers, plus an opening plenary from the 2020 recipient of the Robert Cahn award and a presentation from the best paper prize recipient from the Journal of Nuclear Materials. There will be three parallel sessions and poster sessions which will cover the breadth of research within nuclear materials.
Sujets:
rack 1 Structural components Track 1A Metallic alloys Track 1B Refractory materials Track 2 Fuel systems Track 2A Cladding materials including coating Track 2B Fuel materials, absorbers and fuel cladding interaction Track 3 Cement and Polymers Track 3A Cement Track 3B Polymers
Identifiant de l'évènement:
1362253
Sujets apparentés:
16
EuNano 2020 — European Advanced Nanomaterials Congress
27 oct 2020 - 29 oct 2020 • Stockholm, Suède
Organisateur:
International Association of Advanced Materials (IAAM)
Résumé:
The European Advanced Nanomaterials Congress (EuNano 2020) is intended to provide an opportunity to promote intensive discussions and collaborations among participants to enhance and widen the knowledge of Advanced Materials Research. The 36th Assembly of AMC will offer coordination of Advanced Nanomaterials, Global Graphene Forum & Advanced Energy Materials and Technology contemporary research fields to pave the way for multi-inter-trans-disciplinary translational research and innovations for the market.
Contact:
Email.: contact@iaamonline.org
Sujets:
nanomaterials, nanocomposites, graphene like 2D materials, graphene based devices, graphene technology, energy materials, energy storage and battery, renewable energy
Identifiant de l'évènement:
1304857
17
International LWR Materials Reliability Conference and Exhibition 2020
02 nov 2020 - 04 nov 2020 • New Orleans, LA, États-Unis
Organisateur:
EPRI - Electric Power Research Institute, Inc
Résumé:
The objective of the conference is to gather the leading domestic and international nuclear engineers, materials scientists, vendors and consultants in a forum for exploring, discussing and reporting the latest research, plant experiences, analyses, planning and solutions for increased materials reliability in nuclear power plant components for current and extended periods of operation. The Materials Reliability Program (MRP) Technical Advisory Committee (TAC) Meetings will serve the purpose of allowing committees, namely Internals and Integrity, Inspection, and Pressure Boundary to convene and discuss materials reliability topics.
Identifiant de l'évènement:
1362221
Sujets apparentés:
18
ALTA 2020 Nickel-Cobalt-Copper, Uranium-REE, Gold-PM, In Situ Recovery, Lithium & Battery Technology Conference & Exhibition
07 nov 2020 - 14 nov 2020 • Perth, Australie
Organisateur:
ALTA Metallurgical Services
Résumé:
ALTA 2020 is a world-class annual metallurgical conference, celebrating its 25th year, and a leading platform for innovation. The emphasis of the program is practical, and the themes running through the conference are the various aspects of technology and project development. ALTA conferences are well-known for providing exceptional opportunities for the industry to share ideas, innovations, technologies and projects and develop new contacts.

Five international conferences in one week: Nickel-Cobalt-Copper including Hydromet Processing of Sulphides Forum & Panel, Uranium-REE including Application of Membranes Forum & Panel , Gold-PM including Cyanide Alleviation & Alternative Lixiviants Forum & Panel, In Situ Recovery (ISR) including Application of ISR to Copper Forum & Panel , Lithium & Battery Technology including Trends in Battery Technology Forum & Panel

Associated Short Courses: A-Z of Copper Ore Leaching, Design of Bulk Flow Systems for Hydromet Operations, SX and its Application to Copper, Uranium & Nickel-Cobalt, The ART of HPAL - The Way to Success, Uranium Ore Processing, Lithium Processing Processing

Important Update Following recent Australian Government announcements regarding COVID-19, ALTA 2020 is rescheduled to 7-14 November. All existing bookings and registrations will be transferred to the new dates.

Contact:
Email.: allisontaylor@altamet.com.au
Sujets:
nickel, cobalt, copper, uranium, rare earths, gold, precious metals, lithium, in situ recovery plant operations developments, process technology, new projects, testwork and scale-up, process modelling and control systems, application of mineralogy and geometallurgy, R & D, equipment, reagents, materials, tailings disposal, environmental alleviation
Identifiant de l'évènement:
1112574
Sujets apparentés:
19
Galvatech 2020
08 nov 2020 - 12 nov 2020 • Vienne, Autriche
Organisateur:
ASMET, Austrian Society for Metallurgy and Materials
Résumé:
The International Conference on Zinc and Zinc Alloy Coated Steel Sheet (Galvatech) is the premier international conference on cutting-edge technologies for the processing and performance of coated steel sheets for automotive, electrical appliance and construction applications.
Sujets:
Lighter, Stronger, Durable: Advances in Zn-Coated Sheet Steel
Identifiant de l'évènement:
1357234
20
MetCoke World Summit 2020
11 nov 2020 - 12 nov 2020 • Pittsburgh, PA , États-Unis
Organisateur:
Smithers
Résumé:
MetCoke World Summit has an impressive history of providing an industry-leading conference experience for the coke, coal, and steel industries. Leaders recognize this event as the key place to discuss market insights, supply and demand challenges, regulatory initiatives, and technological processes and advances in the metallurgical coal industry. As the coke market continues to shift, this 2-day conference will provide the opportunity to connect, educate and discuss key global economic initiatives for increased success and profitability.
Identifiant de l'évènement:
1357191
Sujets apparentés:
21
ANKIROS 2020 — 15th International Iron – Steel and Foundry Technology, Machinery and Products Trade Fair
12 nov 2020 - 14 nov 2020 • ISTANBUL, Turquie
Organisateur:
Hannover Messe Ankiros Fuarcılık A.Ş.
Résumé:
Taking place every 2 years since 1992, the fairs establish a global reputation as one of the biggest metallurgy event of 2020. The ANKIROS / ANNOFER / TURKCAST are a high-level gathering place for professionals, deal makers and experts in the steel, foundry and non-ferrous metals industries. This unique business and networking platform will open its doors 12-14 November 2020 and showcase all the new technologies in the metallurgy industry under one roof.
Contact:
Tél.: [+903124396792];     Email.: eozkul@ankiros.com
Sujets:
metallurgy industry such as iron-steel, ceramic, glass, rolling mill equipment, induction and melting furnaces, refractory materials, casting, sanding and molding machines and mixers, heat treatment furnaces, control and test equipment, raw materials
Identifiant de l'évènement:
1353021
Sujets apparentés:
22
2010 MRS Fall Meeting & Exhibit
29 nov 2020 - 03 dec 2020 • Boston, MA , États-Unis
Organisateur:
Materials Research Society
Identifiant de l'évènement:
1091744
23
CONAC 2020
30 nov 2020 - 02 dec 2020 • Monterrey, NL, Mexique
Organisateur:
The Institute for Briquetting and Agglomeration (IBA)
Résumé:
The AIST Mexico Chapter AC, invites the personnel of the Steel Industry, manufacturers, suppliers and users, as well as academic institutions to attend the Congress and Exhibition of the Steel Industry, the largest steel congress in all of Latin America and unique in its kind. You will have the opportunity to attend the Companies Exhibition and network with the leaders in the steel sector, as well as access to the conferences on rolling, steel, Security, maintenance, industry 4.0 and processes and uses of steel.
Identifiant de l'évènement:
1362161
Sujets apparentés:
Page web:
24
38AMC2020 — 38th Assembly of Advanced Materials Congress 2020
07 dec 2020 - 11 dec 2020 • Durban, Afrique du Sud
Organisateur:
International Association of Advanced Materials (IAAM)
Résumé:
38th assembly of Advanced Materials Congress 2020, which will be held at Durban, South Africa from 07- 11 December 2020 provides an international platform for academia and industries to discuss the recent trends in the field of advanced materials science, engineering and technology. Since 2011, International Association of Advanced Materials, IAAM has successfully organized this flagship assemblies in Europe, Asia, America, Australia. 38th AMC 2020 is dedicated to provide an opportunity to promote intensive discussions among participants to widen the knowledge of Advanced Materials research. The 38th Assembly of Advanced Materials Congress will offer the coordination of following contemporary research fields to pave the way for multi-inter-trans-disciplinary translational research and innovations for the market.
Contact:
Email.: contact@iaamonline.org
Sujets:
Advanced Materials, Sensors and Actuators, Catalysis Science, Energy Storage Technologies, Metallic Alloys and Composites, High Entropy Alloy in Defence System
Identifiant de l'évènement:
1344221
25
ICC 2020 — 21st International Corrosion Congress & the 8th International Corrosion Meeting
15 dec 2020 - 18 dec 2020 • São Paulo, Brésil
Identifiant de l'évènement:
1362285
26
Modern Electric Furnace Steelmaking — A Practical Training Seminar
01 fév 2021 - 05 fév 2021 • Tennessee, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST) Electric Steelmaking Technology Committee
Sujets:
Covers safety, the basics of electrical and mechanical features of electric arc furnaces, refractories, and the role of raw materials.
Identifiant de l'évènement:
1362237
Sujets apparentés:
27
Long Products Rolling — A Practical Training Seminar
09 fév 2021 - 11 fév 2021 • Texas, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST) Electric Steelmaking Technology Committee
Résumé:
This seminar will give an introduction to the process, equipment and ancillaries utilized to produce long products; the primary focus is on the process and equipment customarily found within the rolling mill building, i.e., reheat furnace, rolling mill and finishing end. The seminar will contain both theoretical presentations and real-world case studies from long products producers in North America. The presenters represent a cross-section of industry experts in equipment, process, operations and maintenance. The seminar aims to expand an attendee’s knowledge of the complete process and how safety, quality, yield, and facility utilization can be affected at each step.
Identifiant de l'évènement:
1362236
Sujets apparentés:
28
Technology Training — Maintenance Solutions: Fundamentals and New Frontiers
24 fév 2021 - 26 fév 2021 • San Antonio, TX, États-Unis
Organisateur:
AIST Maintenance and Reliability and Lubrication and Hydraulics Technology Committees | Association for Iron & Steel Technology (AIST)
Résumé:
Hands-on instruction, tools, and the best technologies for mechanical, electrical, lubrication, hydraulics, management system maintenance and reliability solutions.
Identifiant de l'évènement:
1357258
Sujets apparentés:
29
Technology Training — DRI & HBI: Logistics, Production and Utilization Seminar
01 mar 2021 - 03 mar 2021 • Mobile, AL, États-Unis
Organisateur:
AIST Direct Reduced Iron Technology Committee | Association for Iron & Steel Technology (AIST)
Résumé:
The production and use of direct reduced iron (DRI) in North America is increasing with the reduced price of natural gas due to advances in drilling technology. As such, DRI is becoming a more important feedstock to the steelmaking process. This conference will focus on areas that include: raw materials and DRI handling and shipping; technologies to produce DRI; and the use of DRI to produce steel in electric arc furnaces (EAFs), blast furnaces and basic oxygen furnaces (BOFs).
Identifiant de l'évènement:
1357171
Sujets apparentés:
30
SPIE Smart Structures + Nondestructive Evaluation
07 mar 2021 - 11 mar 2021 • Long Beach, California, États-Unis
Organisateur:
SPIE
Résumé:
This meeting explores the latest technologies in development for automotive, aerospace, civil infrastructure, and Industry 4.0. Submit your latest work in advanced materials and sensor systems for NDE and structural health monitoring.
Contact:
Customer Service;     Tél.: [3606763290];     Email.: customerservice@spie.org
Sujets:
Bioinspiration, Biomimetics, Bioreplication, EAPAD, Active and Passive Smart Structures, Mechanics of Multifunctional Materials, Sensors and Smart Structures Technologies for Civil, Mechanical, and Aerospace Systems, NDE of Advanced Materials, Aerospace, Civil Infrastructure, and Transportation, HMS, NDE 4.0 Smart Structures for Industry, Smart Cities, Communication, and Energy.
Identifiant de l'évènement:
1360648
31
Technology Training — Digital Transformation Forum for the Steel Industry
15 mar 2021 - 17 mar 2021 • Pittsburgh, PA , États-Unis
Organisateur:
AIST’s Electrical Applications/Sensors Subcommittee and Computer Applications Technology Committees | Association for Iron & Steel Technology (AIST)
Résumé:
Digital Transformation is a critical component for steel companies’ future success. It is a broad concept with the potential to influence all aspects of the steelmaking process.
Identifiant de l'évènement:
1357183
32
METEF 2020 — Expo of Customized Technology for the Aluminium, Foundry Castings & Innovative Metals Industry
25 mar 2021 - 27 mar 2021 • Bologna, Italie
Identifiant de l'évènement:
1275710
33
CORROSION 2021 — Conference and Exposition
18 avr 2021 - 22 avr 2021 • Salt Lake City, UT, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128172
34
AISTech 2021 — Conference & Exposition
03 mai 2021 - 06 mai 2021 • Tennessee, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Résumé:
AISTech 2021 — Steel’s Premier Technology Event will feature technologies from all over the world that help steel producers to compete more effectively in today’s global market. AISTech is a can’t-miss event for anyone involved at any level of today’s steel marketplace, providing perspective on the technology and engineering expertise necessary to power a sustainable steel industry. Whether you present, attend or exhibit, take advantage of this opportunity to network with industry peers and discover ways to improve your productivity.
Identifiant de l'évènement:
1357173
Sujets apparentés:
35
ICG-EAC Annual Meeting 2021
16 mai 2021 - 21 mai 2021 • Kingston, Ontario, Canada
Organisateur:
ICG-EAC, the International Cooperative Group on Environmentally-Assisted Cracking of Water Reactor Materials
Identifiant de l'évènement:
1362317
36
BALKANTRIB '21 — 10th International Conference on Tribology
20 mai 2021 - 22 mai 2021 • Belgrade, Serbie
Organisateur:
Serbian Tribology Society and Faculty of Mechanical Engineering in Belgrade
Résumé:
The 10th International Conference on Tribology – BALKANTRIB '21 will be held in Belgrade (Serbia) at the Faculty of Mechanical Engineering. The scope of the Conference embraces the state-of-the-art and future trends in tribology research and application. Tribology as an interdisciplinary scientific area is always in the core of research and industrial interests, and the Conference aims to stimulate the collaboration between scientists, researchers, industrial engineers and specialists. The Conference will focus on both the fundamental and applied aspects of friction, wear and lubrication, at all scales. Contributions all over the world, involving any aspect of tribology are welcome.
Contact:
Organising Committee;     Email.: balkantrib@mas.bg.ac.rs
Sujets:
Fundamentals of friction and wear, Tribological properties of solid materials, Surface engineering and coating tribology, Lubricants and lubrication, Tribotesting and tribosystem monitoring, Tribology in machine elements, Tribology in manufacturing processes, Tribology in transportation engineering, Design and calculation of tribocontacts, Sealing Tribology, Biotribology, Nano and microtribology, Other topics related to tribology
Identifiant de l'évènement:
1336837
37
EMCR 2021 — 13th International Conference on Electrochemical Methods in Corrosion Research
30 mai 2021 - 04 jui 2021 • La Rochelle, France
Résumé:
The 1st International Conference on Electrochemical Methods in Corrosion Research (EMCR) was held in Manchester in 1982, and it has subsequently run in Toulouse (1985), Zurich (1988), Helsinki (1991), Lisbon (1994), Trento (1997), Budapest (2000), Ysermonde (2003), Dourdan (2006), Maragoggi (2012), Troia (2015) and Cambridge (2018). The 13th EMCR conference will be held in La Rochelle, France from May 30 to June 4, 2021, at La Rochelle University. This conference has evolved into one of the leading events in corrosion electrochemistry, providing an intimate, focused meeting.
Sujets:
Electrochemical studies at high temperature, for example in pressurised water or molten salts. Scanning and microprobe techniques, including scanning probe, SECM, LEIS and techniques based on AFM technology. Electrochemical studies of environmentally-assisted fracture. Detection of hydrogen and studies of hydrogen interaction with metals. Electrochemical impedance spectroscopy and electrochemical noise. Modelling from the atom to the application. Combination of electrochemical studies with complementary techniques (e.g. optical, ultrasonic, radiographic, tomographic). Cathodic protection and inhibition.
Identifiant de l'évènement:
1362272
38
ECG-COMON Annual Meeting 2021
07 jui 2021 - 08 jui 2021 • Villigen, Suisse
Organisateur:
ECG-COMON - European Cooperative Group on Corrosion Monitoring of Nuclear Materials
Identifiant de l'évènement:
1362348
39
Stranggießen 2021 — Symposium Stranggießen 2021
08 jui 2021 - 09 jui 2021 • Neu-Ulm, Allemagne
Organisateur:
Deutsche Gesellschaft für Materialkunde e.V.
Contact:
Tagungsbüro;     Tél.: [06975306741];     Email.: stranggiessen@dgm.de
Sujets:
Stranggießen, Rohr, Draht, Barren, Bänder, Bolzen, Verfahrensentwicklung, Schwermetallhalbzeug, Leichtmetallhalbzeug, Prozesssteuerung, Werkzeugbau, Profildesign, Halbzeug, Aluminiumhalbzeug, Kupferhalbzeug, Buntmetall, Eisenmetall, Edelmetall, Anlagentechnik, Verfahren, Umform, Walzen, Pressen, Halbfabrikat, Messtechnik,
Identifiant de l'évènement:
1362070
Sujets apparentés:
40
ICEME Seoul 2021 — International Conference and Exhibition on Materials and Engineering
08 jui 2021 - 10 jui 2021 • Seoul, Corée du Sud
Résumé:
International Conference and Exhibition on Materials and Engineering (ICEME) aim is to provide expert insights into recent advances in key areas of Materials Science and Engineering. Materials Science and Engineering is a study of all materials like Graphene, Nanomaterials, Biomaterials, Physics and Chemistry of Materials, Metals and Metallurgy, Polymers, Semiconductors, Ceramics.
Contact:
project co-ordinater;     Tél.: [1-650-835-7727];     Email.: allenjack357@gmail.com
Sujets:
Materials Science and Engineering, Materials Chemistry, • Emerging Smart Materials, Solar Energy Materials
Identifiant de l'évènement:
1363180
Sujets apparentés:
41
ICF15 — 15th International Conference on Fracture
13 jui 2021 - 18 jui 2021 • Atlanta, États-Unis
Résumé:
Founded in 1965, the International Congress on Fracture is one of the premier international bodies promoting worldwide cooperation among scientists and engineers dealing with mechanics and mechanisms of fracture and strength of solids. The conference is held every four years, and ICF15 will be returning to the continental United States after 32 years. This conference will focus on the latest interdisciplinary research in the field of fracture and is a must attend event for senior and young researchers, students, post-doctoral fellows, and industry professionals working in the field of fracture throughout the world.
Identifiant de l'évènement:
1362358
42
ESTAD 2021 — European Steel Technology and Application Days
14 jui 2021 - 18 jui 2021 • Stockholm, Suède
Organisateur:
Jernkontoret – the Swedish Steel Producers’ Association
Résumé:
Only those who continue to develop their businesses remain competitive. The prerequisite for this development means being constantly informed about the latest and most sophisticated technological advances, exchanging ideas and initiating and expanding networks with clients, partners and suppliers. Therefore Jernkontoret invites you to attend the 5th European Steel Technology and Application Days (ESTAD) 2021 in Stockholm. Jernkontoret and its partners offer visitors the perfect opportunity to reach their objectives. At this event you acquire the latest information on new ideas and developments as well as on the state-of-the-art in metallurgical process technologies for iron and steel production, steel materials and steel application.
Identifiant de l'évènement:
1357163
43
AMPM 2021 — North America's Leading Metal Additive Manufacturing Conference
20 jui 2021 - 23 jui 2021 • Orlando FL, États-Unis
Organisateur:
Metal Powder Industries Federation (MPIF)
Résumé:
Additive Manufacturing with Powder Metallurgy brings together global experts presenting the latest developments in this fast-growing field. Topics include materials, processes, technical advances & barriers, and applications.
Identifiant de l'évènement:
1248196
44
ROLLS6 2021
23 jui 2021 - 25 jui 2021 • Londres, Royaume-Uni
Organisateur:
IOM3, The Institute of Materials, Minerals and Mining
Résumé:
Roll making technology responds to advancements in rolling practices, developments of rolled steel materials, and developments of new roll manufacturing methods. The lag time involved in development and production of new roll* qualities often means existing roll inventories become prematurely obsolete. There is a growing concern that mill roll reliability could become a limiting factor for commercial adoption of new flat and long rolled metal material grades in existing rolling mills. Engineering-based mill roll specifications and roll material standards should be formulated to address future flat roll industry requirements.
Identifiant de l'évènement:
1357110
45
High Tech Die Casting International Conference
23 jui 2021 - 25 jui 2021 • Vicenza, Italie
Organisateur:
Associazione Italiana di Metallurgia
Résumé:
The HTDC Conference is the meeting point for experts involved in the research activities and development of foundry technologies, processes or materials, as well as those employed by the foundry companies of light and non-ferrous alloys, and who are prepared to share some of their current experiences.
Identifiant de l'évènement:
1357142
46
International Conference on Advances in Metallurgy of Long and Forged Products
27 jui 2021 - 30 jui 2021 • Vail, Colorado, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Résumé:
Long and forged products are used in many critical applications, including transportation, energy and heavy equipment. This symposium intends to bring together international and domestic researchers from industry and academia to present on topics related to advances in the physical, mechanical, and product metallurgy of bars, tubes and forgings. Presentations will address new developments in areas such as alloy design, thermal or thermomechanical processing, microstructure control during steel manufacturing or heat treatment, application of alloys to the automotive and energy industries, and various other aspects of physical and mechanical metallurgy affecting manufacture of the raw materials and manufacture and service performance of the final products.
Sujets:
Bar, rod, and wire products Microstructural control Microalloying approaches Surface hardening and modification Hydrogen embrittlement High-strength and/or high-toughness steels Fatigue of heat-treated products Materials and/or process modeling Forgings: closed or open die, large or small section Thermomechanical processing developments Seamless mechanical tubular products Improved steel cleanliness Innovative facilities and process technologies Machinability
Identifiant de l'évènement:
1362257
Sujets apparentés:
47
TMP2020 — The 6th International Conference on ThermoMechanical Processing
05 jul 2021 - 07 jul 2021 • Shenyang, Chine
Organisateur:
The Chinese Society for Metals
Résumé:
ThermoMechanical Processing (TMP) is an established and vital part of the production method for increasing and tailoring the mechanical properties not only for steels, but also expanding to various non-ferrous alloys. The TMP allows improving the microstructural features in order to realize the metal products fitting the requirement imposed by the modern mechanical and structural engineering. With a scope that ranges from the latest process and product developments through to associating physical metallurgy in the thermomechanical processing of steels and non-ferrous alloys, TMP 2020 Conference aims at examining the key aspects involved in TMP: phase transformations, complex microstructures evolution, applications in CSP/ESP, in-line heat treatments, measurement techniques and the technological forming operations (rolling, forging, extrusion etc.).
Identifiant de l'évènement:
1357122
Sujets apparentés:
48
Gordon Research Seminar — Physical Metallurgy
10 jul 2021 - 11 jul 2021 • Southern New Hampshire University, Manchester, NH, États-Unis
Identifiant de l'évènement:
1320917
49
Gordon Research Conference — Physical Metallurgy
11 jul 2021 - 16 jul 2021 • Southern New Hampshire University, Manchester, NH, États-Unis
Identifiant de l'évènement:
1320896
50
AIST Globe-Trotters Member Chapter — Annual Meeting
28 aou 2021 - 31 aou 2021 • Fernandina Beach, Fla., États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Résumé:
The Globe-Trotters Member Chapter annual meeting is unique in that it has more than 50 years of history behind it. To kick off the meeting, the producers-only roundtable discussion is perhaps the most valuable portion of the event. Here, producers are separated into meltshop and rolling mill groups, and various topics are discussed, from safety to quality and production. After lunch, the suppliers are invited to join the group for a question-and-answer session followed by an open discussion. The technical exchange continues on Monday morning with presentations from producer members. This is the perfect opportunity to hear about the latest projects and updates on what is happening inside steel mills.
Identifiant de l'évènement:
1357167
51
AIST Southeast Member Chapter — Annual Meeting
12 sep 2021 - 14 sep 2021 • Myrtle Beach, SC, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Identifiant de l'évènement:
1357157
52
Emerging Leaders Alliance Conference
26 sep 2021 - 29 sep 2021 • Pittsburgh, PA, États-Unis
Organisateur:
IME, AIST, ASCE, NACE, BGWA, SME, SPE and TMS
Résumé:
The Emerging Leaders Alliance (ELA) is a partnership among leading engineering, research and science-based organizations that provides high quality leadership training. Our mission is to provide an interdisciplinary annual conference for select professionals, promoting the development of great leaders to guide our professions in addressing the needs of people in the 21st century.
Identifiant de l'évènement:
1362223
Sujets apparentés:
53
NPC 2021 — International Conference on NUCLEAR PLANT CHEMISTRY
27 sep 2021 - 01 oct 2021 • ANTIBES, France
Organisateur:
SFEN - French Nuclear Society "Materials Science and Technology, Non Destructive Testing, Chemistry" Technical Section
Résumé:
The conference focuses on the latest developments in science and technology of water chemistry control in nuclear reactor systems from around the world.
Identifiant de l'évènement:
1362357
54
ALTA 2021 — Nickel-Cobalt-Copper, Uranium-REE, Gold-PM, In Situ Recovery, Lithium & Battery Technology Conference & Exhibition
13 nov 2021 - 20 nov 2021 • Perth, Australie
Organisateur:
ALTA Metallurgical Services
Résumé:
ALTA 2021 is a world-class annual metallurgical conference, now in its 26th year, and a leading platform for innovation. The emphasis of the program is practical, and the themes running through the conference are the various aspects of technology and project development. ALTA conferences are well-known for providing exceptional opportunities for the industry to share ideas, innovations, technologies and projects and develop new contacts.

Five international conferences in one week: Nickel-Cobalt-Copper including featured forum & panel, Uranium-REE including featured forum & panel, Gold-PM including featured forum & panel, In Situ Recovery (ISR) including featured forum & panel, Lithium & Battery Technology including featured forum & panel

Associated Short Courses: Treatment of Nickel-Cobalt Laterites, Copper SX/EW Basic Principles & Detailed Plant Design, Heap Leaching & its Application to Copper, Gold, Uranium & Nickel Ores

Contact:
Tél.: [+61411692442];     Email.: allisontaylor@altamet.com.au
Sujets:
metallurgy, innovation, nickel, cobalt, copper, uranium, rare earths, gold, lithium, lithium processing, lithium batteries, battery technology, in situ recovery, gold processing, laterites, extractive metallurgy, heap leaching, electrowinning
Identifiant de l'évènement:
1270748
Sujets apparentés:
55
AIST 2021 Leadership Conference
18 nov 2021 - 20 nov 2021 • Amelia Island, Florida, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Identifiant de l'évènement:
1362266
Sujets apparentés:
56
STIS-2021 — 4th International Conference on Science and Technology of Ironmaking and Steelmaking
14 dec 2021 - 17 dec 2021 • Mumbai, Inde
Organisateur:
Centre of Excellence in Steel Technology (CoEST), The Department of Metallurgical Engineering and Materials Science, IIT Bombay
Identifiant de l'évènement:
1357136
Sujets apparentés:
57
CORROSION 2022 — Conference and Exposition
03 mar 2022 - 10 mar 2022 • San Antonio, TX, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128171
58
AISTech 2022 — Conference & Exposition
02 mai 2022 - 05 mai 2022 • Pennsylvania, États-Unis
Organisateur:
Association for Iron & Steel Technology (AIST)
Résumé:
AISTech 2022 — Steel’s Premier Technology Event will feature technologies from all over the world that help steel producers to compete more effectively in today’s global market. AISTech is a can’t-miss event for anyone involved at any level of today’s steel marketplace, providing perspective on the technology and engineering expertise necessary to power a sustainable steel industry. Whether you present, attend or exhibit, take advantage of this opportunity to network with industry peers and discover ways to improve your productivity.
Identifiant de l'évènement:
1357148
Sujets apparentés:
59
ICC9 — 9th International Congress on Ceramics
10 jul 2022 - 14 jul 2022 • Cracovie, Pologne
Organisateur:
European Ceramic Society (EcerS) and the Polish Ceramic Society
Résumé:
The 9th International Congress on Ceramics will be organised by ECerS and the Polish Ceramic Society from 10th to 14th July 2022 in Krakow, Poland.
Identifiant de l'évènement:
1217426
60
CORROSION 2023 — Conference and Exposition
19 mar 2023 - 22 mar 2023 • Denver, CO, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128181
61
CORROSION 2024 — Conference and Exposition
19 mar 2024 - 24 mar 2023 • New Orleans, LA, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128235
62
CORROSION 2026 — Conference and Exposition
15 mar 2026 - 19 mar 2026 • Houston, TX, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128223
63
CORROSION 2028 — Conference and Exposition
05 mar 2028 - 09 mar 2028 • San Antonio, TX, États-Unis
Organisateur:
NACE International
Identifiant de l'évènement:
1128222


Conference-Service.com met à la disposition de ses visiteurs des listes de conférences et réunions dans le domaine scientifique. Ces listes sont publiées pour le bénéfice des personnes qui cherchent une conférence, mais aussi, bien sûr, pour celui des organisateurs. Noter que, malgré tout le soin que nous apportons à la vérification des données entrées dans nos listes, nous ne pouvons accepter de responsabilité en ce qui concerne leur exactitude ou étendue. Pensez donc à vérifier les informations présentées avec les organisateurs de la conférence ou de la réunion avant de vous engager à y participer!

Dernière mise à jour: 30 Juin 2020